About carsten@siski.de

carsten@siski.de · 05-15-2023

Hello alltogether,I'm using a SG350X-24P and I upgraded from firmware 2.5.8.15 to firmware 2.5.9.16. After my workstation with Mellanox 10G card (connected via fiber to the uplink ports) came up, the switch crashed immediately with a hard reboot in a...

carsten@siski.de · 06-27-2018

Hello, I own a SG350X-24P which worked flawlessly until today. Now several ports don't supply PoE power any more. Resetting and power cycle didn't help. Now I get the following after checking "show power inline" at the CLI prompt: Unit Module N...

carsten@siski.de · 09-06-2017

Hello,I'm implementing basic IPv4 security with a SG350X switch using DHCP snooping database, the IP source guard and ARP inspection. Everything works as expected for wired devices - only if an IPv4 address is assigned by the server via DHCP, IP acce...

carsten@siski.de · 09-27-2020

Hello krufka, The device was simply broken. A hardware replacement under the device warranty (RMA) was necessary. It seems to me that the devices with hardware version "V01" are susceptible to this problem. I now have a SG350X-24P with hardware versi...

carsten@siski.de · 06-27-2018

Hi, Thanks for your answer. I talked to support and they sent me a ticket number and they will open a RMA case. Regards, Carsten

carsten@siski.de · 06-27-2018

@Iliya Gatsev wrote: Hi, My name is Iliya Gatsev from Cisco Technical Support Team. It will be good to call our support line and open a support case. https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html T...

carsten@siski.de · 02-20-2018

Hi alltogether, is there a fix for this issue? I'm using the most current firmware 1.0.1.11 and the WAP571 always uses regulatory domain AT (for austria) which is plain wrong as I'm located in Germany. Every other wifi device I've available has this ...

carsten@siski.de · 09-16-2017

Hi, Thanks for your answer. Actually I was hoping for a software solution on side of the Switch. In my opinion it's a standard scenario. Putting another switch inbetween actually solves the problem with the ip source-guard but creates new ones: No so...

Member Since	‎08-21-2017 01:40 PM
Date Last Visited	‎05-17-2023 12:01 AM
Posts	8

User Statistics

User Activity

SG350X-24P - Crash with constant reboot with Firmware 2.5.9.16

SG350X-24P: PoE not working on some ports any more

SG350X-24: Configure ip dhcp snooping with more than one WLAN AP

Re: SG350X-24P: PoE not working on some ports any more

Re: SG350X-24P: PoE not working on some ports any more

Re: SG350X-24P: PoE not working on some ports any more

Re: WAP571 : wrong Country Code broadcasted

Re: SG350X-24: Configure ip dhcp snooping with more than one WLAN AP