Anyone knows how to configure Cisco CUBE to communicate with Avaya IP Office 500 via SIP trunk? Is it more or less the same configuration when you setup the CUBE SIP trunk to CUCM?1. Setup the voice service voip and sip2. Setup inbound dial-peer from...
Hi All,We are not able to change the date and time format for our phones 88XX 3pp Phones. We found this article in WebEx Help https://help.webex.com/en-us/article/ngitsgm/Change-the-Date-and-Time-Format-on-Desk-Phones but unfortunately the settings i...
Hi All! Is there a way we can set a PQ priority for agents? The Proficiency level of Attributes settings are only for Agents available, but not for PQs that are already on queue. Setup is below: Precision Queues:PQ1: ATT1<=10PQ2: ATT2<=10 Agent1 Skil...
Hi Everyone,
Please see image below:
We are configuring SIP Trunking between VG1 and VG2 and CUCM. It will be configured only for inbound calls (calls coming from VG1, going to VG2, and lastly terminated in CUCM).
VG2 to CUCM is already configured ...
Hi All!
I have a problem with 1 Cisco 6941 IP Phone. The phone intermittently freezes and upon checking in CUCM, it becomes unregistered. Sometimes I can also see the phone in "Network Unavailable" state.. Then I just unplug and plug back the IP Pho...
Is there a way to do "Apply Changes" or "Reboot" devices on a location level? If you have 1000 devices, how is this going to take effect on all devices without going on each device?
Hello. What if my CUCM is non compliant for 50 days, then I fixed it by deleting the unused devices. So now it will be compliant. Then after a few days it became uncompliant again. Will I have another 60 days grace period or will it just continue the...
I had the same problem. When I connect https://IP/ to it connects but not the https://IP/admin/advanced though as Im getting the same prompt to enter password. Nothing worked for the password. What I had to do is delete the device from Webex calling...
