Hello, The SR520W has built-in wireless and DHCP services. However, if I don't want to use the DHCP server of the 520 router, and choose to use a DHCP from another server (Windows SBS), the wireless clients that authenticate do not get an address ass...

Hello,I have a Cisco 2501; after a power outage it will only boot to "boot mode". The register is set to 0x2102 and "sh flash" displays the valid image. The router config is still then, and is loaded to RAM (sh run) on boot. The local FaEth (LAN) add...

Currently I have a FR network, consisting of 18 PVC's. I wanted to introduce some HA or Failover when one of the PVC's goes down. What are my options on a 2620XM? I do currently have a VPN solution, should IPSec/SSL be an option. However, I'm wonderi...

Hello,I have 6 users on a small WLAN. The AP is an 1100 Series, and I currently have no WEP encryption enabled (nor WPA) for testing purposes. The network has worked fine for a few months without any disruption, however I now have (2) of the (6) wire...

Is it possible to assign to different SSID's on an 1121AP? I would like to have both SSID's apply to the local subnet. However, one SSID would use one WEP key, while the secondary SSID would use a different WEP key. I've configured both SSID's in the...