We have issues with only these MacPro models negotiating 100/full on our 3560 switches running IOS version 12.2(25r). If I set the port to auto/auto on both ends it negotiates 100/half. If I hard code the port to 100/full and then have them them ha...
We use the 871W for telecommuting purposes with our company. We are using IP phones currently the Cisco 7960 and that works fine with the AC adaptor, but our company is switching over to Avaya IP phones and they do not have an external power sour...
I just wanted to add if your in a PAN you must deregister and set each server as standalone make the changes put the PAN back together afterward, after all the services start up again. I wish there was an easier way as I have 4 servers, 2 arr moving ...
Any answers yet? I am on ISE 3.0 p7 and have had this issue as long as I can remember going back to at least 2.4 if not the original ISE 1.0. It would be nice to get a fix for this.I had hope this would go away on version 3.x and above. Also this ...
In my environment we use AirWatch for mobile devices, and JAMF for Macbook laptops, witht he assistance of TAC we were able to configure an autorization policy by creating Endpoint profiles forcing the mobile devices to query Airwatch and the MAcbook...
@howon rebooting the controllers fixed it, and to add another note a URL_REDIRECT_ACL was needed not just on the Controller ACL but also applied our on FlexConnect Groups policy too. Thanks for your reply though that was the trick, reboot the control...
@howon let me clarify it isn't working on the Android, it just gives a message when connecting saying you must connect to this network and when you click on it the banner pops up.I will try rebooting the controllers when I can (off business hours), b...
