About flamegri11ed

flamegri11ed · 04-08-2024

OLVM requires fence agent setup for power managementAll listing of Service Profiles in the Cisco 6296 environment with B200M3's were testing fine.Listing Service Profiles : fence_cisco_ucs --ip='10.16.16.80' --username='fence-kvm-user' --password='fe...

flamegri11ed · 12-13-2021

B200 M5 chassis only 4 x blades.3 older M5's in production 1 new M5 is currently being installed with expander card installed(no discovery issues) atm ESXi installed Proposed procedure : 1. I put the ESXi host into maintenance mode and shut down.2. ...

Adding new B200 M5 Service Profile · 12-06-2021

Iscsi bootVMwareWe added a new B200 M5 blade(blade5/slot5) with expander card to a B200 M5 only chassis with 3 existing B200 M5's(No expander cards-to be added after successfully adding the new blade in slot 5) Current Errors adding the new blade are...

flamegri11ed · 08-18-2021

Hi UCS Community, We have 4 Server links per chassis per FI with our 3 chassis (2 x 16 B200 M3 and 1 x 3 B200 M5)We have 6 Uplinks per FI to the 5548UPs. Is it advisable to insert all cables (to fully populate the IOM) into all 3 chassis and the 5K's...

flamegri11ed · 09-29-2020

Hi Cisco Community,We have moved from SAN to NAS, iscsi boot and NFS in Vsphere.We have ports 19,20 for Ethernet Uplinks carrying all the traffic at the moment to our Cisco Nexus 5548up's.Starting with the Subordinate 6296, we want to disable the FCo...

flamegri11ed · 04-15-2024

Thank you Brian.I could achieve that response by enabling Redfish on our C220M4 by doing curl -u username:password -k https://cimc_ip/redfish/v1/Systems/Serial#I got the access denied message however on the B200M5 blade on the new Intersight environm...

flamegri11ed · 04-15-2024

Cisco Intersight Managed Mode Configuration Guide: uses the IPMI policy with a local user with a local user role and Service Profile IP to achieve the(power management) fencing option-fence fence_ipmilan. Is this correct in saying this would be the ...

flamegri11ed · 04-13-2024

My Redfish attempt from the Oracle KVM server :[root@kvm ~]# fence_redfish --ip='10.16.16.80' --username='Oracle' --password='password' --systems-uri=/redfish/v1/Systems/FCH221122CS --ssl-insecure -o statusERROR: Unable to get PowerState: https://10....

flamegri11ed · 04-10-2024

Thank you Brian . I will add the fence_redfish agent and test it and report the outcome.The default switches for username and password and - status does not reveal anything atm.Thank you for the information.

flamegri11ed · 06-06-2022

I don't know if this is relevant, but one of our FI's, 6296, would not boot after a maintenance slot power-down. We left it powered on in that state and running on 1 FI )it booted after a week. Only saw this article today"(Field Notice: FN - 64094 -...

Member Since	‎09-19-2019 11:55 PM
Date Last Visited	‎04-17-2024 12:47 AM
Posts	26
Total Helpful Votes Received	5

User Statistics

User Activity

UCS : Power Management : fence agent :Intersight

Adding B200 M5 expander cards

Adding new B200 M5 Service Profile

6296 FI and IOM 2208 : Server and Uplink 4-8 link change

Changing FCOE uplinks to Ethernet Uplinks

Re: UCS : Power Management : fence agent :Intersight

Re: UCS : Power Management : fence agent :Intersight

Re: UCS : Power Management : fence agent :Intersight

Re: UCS : Power Management : fence agent :Intersight

Re: UCS-FI-6296UP -- bricked due to stuck / failed firmware update