Solved: Basic setup for SPA3102

daniel · ‎10-19-2009

Hi, I've got this information from my ISP for using with VOIP but I am not really sure where to configure it on the SPA3102:

SIP-username

SIP-password

SIP-Server

Voicemail

Username

Password

Thanks in advance!

/Daniel

dhames · ‎10-20-2009

If you have your PC plugged into the yellow Ethernet port on the SPA3102, then you will need to access the device's interface by going to: http://192.168.0.1/admin/voice/advanced/

Once the GUI loads:

-Click on the "Line 1" tab.

-Scroll down until you see "Proxy and Registration" and "Subscriber Information"

That should do it.

View solution in original post

dhames · ‎10-20-2009

If you have your PC plugged into the yellow Ethernet port on the SPA3102, then you will need to access the device's interface by going to: http://192.168.0.1/admin/voice/advanced/

Once the GUI loads:

-Click on the "Line 1" tab.

-Scroll down until you see "Proxy and Registration" and "Subscriber Information"

That should do it.

daniel · ‎10-22-2009

Thanks, I thought that was the place to change the settings but it feels better to getting it confirmed :).