I need to configure my SPA2100 device, but able to login only as regular user with credentials user/primus, any admin default password the device does't accept. I tryied: admin/advanced, admin/admin, root/admin, and many other default passwords from ...
Forum Posts
Helo All. Is ATA 192 compatible with Avaya Communication Manager 8.1 platform? We recently purchased one and I cannot get the extension registered. It states it failed.
Hello!With our current dialplan we have the problem that the dialtone is much too short and leads into a busy signal 3 seconds after on-hook if no input follows. What we want is an infinite dialtone as long as no input has been given.Our current dial...
Hello, I want to add a bluetooth headset to my SPA525G2 set, but modern BT headsets no longer use a BT pin code. As is the case with my shure AONIC TW2 215, my cisco station sees the shure headset well, refuses to associate it without a pin code. I t...
Hi everybody,I would like to modify some sip-headers in a incoming sip call.For example, I have created a new sip-profile like this.Notice that the IP is masker for security reasons.voice class sip-profiles 1 request INVITE sip-header Record-Route m...
Hi,I was given the task to do an interface between a hotel PMS application and Cisco Broadworks telephone system.I need to open the line when a guest ChecksIn in the PMS and provide his/her name so it will display on the reception telephones.They sug...
Hi all.I'm running into an issue with a phone (SPA514G) that doesn't appear to be properly sending all digits dialed. The user has the last digit cut off when sending it to the phone server. We are trying to dial "9612xxxxxxx". The reason why is the ...
I have a SPA8000 that has been in service to provide analog loop start lines to a PBX for many years. I recently changed SIP providers, and the new provider inserts the following "verification" into various SIP headers conveying caller ID (CNAM):[V]T...
I am trying to auto-register 8851 phones on CME. I have IOS 15.9. Configured auto-register, password, and assigned DN.Does the voice register dn, voice register pool supposed to be configured or is it automatically configured? I also have SCCP confi...
Hello: We are starting to get more and more SIP Vicious scans. Today, we received a scan and now when some (but not all) of our phones dial extension 100, instead of "To: 100" we see "To: sipvicious".I understand most SIPV scans are attempts to enum...
Hi there, I loose the web GUI access to a CP-7821 3PCC, I just reset it but all I can get is:Before the reset I was able to access the WebGUI but the credentials won't able to let me in.Thanks for help. Guillaume
Hi supportWe are a danish ISP who use Linksys RTP300 and WRP400 routers as CPE equitment. Trough our Danish Cisco contact (Henrik Bønnelycke) we have been told to discuss our prolems with the WRP400 router here.Our problem is that the router seems qu...
I am using a Cisco SPA122 ATA I have an intercom phone that dials my SIP phone number. When I press 5 to allow entry, the door does not unlock. I have tested with my friend, had him call me, when I press 5, my friend does not hear the tone. When I ca...
Hi,I have a modem with IINet (VX420-G2h (AX5400) with a ATA112 connected.I have connected a phone to Line 1 of the ATA. The configuration of Line 1 is attached.I can make calls form the phone fine but I can't receive calls.It would be appreciated if ...
Hi everyoneI am trying to reboot remotely a CISCO uc540w-bri-k9. On the interface, it says "uptime is 1 year, 4 days, 3 hours, 43 minutes", when I use the command "show version", that is why I want to reboot it. I tried commands "restart" and "reload...
