Well what can I say ? we purchased a few 122's for testing & product evalation and with the latest firmware SPA1xx_1.1.0_011.bin about a week after flashing it, there is now static sounds and buzzing coming from spa-122 ata, once I swapped out the s...
hi, i notice that there is no Caller ID Map for spa122 (spa1x2), while this functionality is present for ip phone like spa502g or old spa942 (linksys). Is it possible to add this functionality to spa1x2 firmware next release? thanx Inarco
Hello! I am trying to set up an SPA514 phone (and others), but I am having problems trying to set up the unused line keys as BLF/Speed Dial keys... I am trying to do the provisioning, but I also have the same problems with the web interface on the p...
Hello. I have a Cisco SA520 Appliance. Till now there wasn´t a problem (my internet connection was 30mb). But now the connection has been upgraded to 200mb but the speed tests show only 70mbs. If i'm connected to the ISP router, the speed is 200mb. B...
Need help with restoring access gateway.Button "Reset" is not working, probably disabled.Username and password are not known.Tried by "IVR" # 73738 - invalid options Which means you can still get back to the gateway?Thank you.
Hi please help me I recently bought an unlocked SPA-3102. I started setting it with cucm 9 I have two problemOne that I am able to receive incoming calls through pstn line on the line 1 or any voip device but one way voice is established>>> pstn to ...
Hi I have inherited a number of SPA303 and SPA504 phones that are locked with unknown user AND admin passwords. The phones were not on the current network, so do not have the original provisioning data or anything. All I want to do is get these phon...
Hi, I can't put to work a SPA112 in a remote office, connected via OpenVPN to my main office FreePBX. From remote office I can call out, but the other person don't hear me (I hear without problem), and I don't hear the normal ring before the call is...
Hi, So I have a brand new SPA-112 ..... it's plugged in to my PC and the NIC is set to 192.168.15.2. I can ping myself but can't get bupkis out of the ATA, so ....... - What do you need to do to reset it ? Press the reset for how long? - If you pl...
We are having an issue using a Cisco SPA 112 with a freeswitch based PBX. Depending on caller ID settings on the PBX, the ATA seems unable to process the 180 ringing or 183 session progress message sent back from the server. All the ATA is giving f...
Hi Folks, kindly need your help I've problem with BE3000 while setting SIP Trunk Summary: Summary : Currently we have Cisco BE3000 with software version 8.6.4.10000-15. We need to perform PoC to integrate BE3000 with Panasonic NS300 using SIP Trunk. ...
Hello experts, I received this inquiry from a customer in France: Is it possible to import automatically contacts (name and number) from a CSV file, VCF file or DB file on Cisco IP Phone 303? I appreciate your attention.
where i can find the exact number of phones such as ip phone, digital phones etc that can be connected in BE6000 series .
Hello, Please i need help, i have setup a multisite network for a client, the client has 500 series and 7900 series ip phone. Calls from the 500 series phone from one site to both phones series works. The issue is that calls initiated from the 7900 ...
Hello, I am wondering if it is possible to transfer a call through a third party application. So the a call is answered on the SPA504G and a single click on the screen of the user will initiate a transfer on the device. Another click will actualy ma...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: