Voice Systems and Accessories - Small Business

Hi All,I am trying to change the "System Name" field on Cisco IP Phone SPA504G which I cannot find anywhere at all in the phone Web interface menus.The aim is for the phones to registering on my SG300 switches using CDP with meaningful names as atm i...

 Fault Description:       THE CALL  DISCONNECT   DURING  THE  CONVERSATION   MORE  FREQUENTLY.LINES  ARE  GETTING  UNRGISTERED. 

Hey Everyone,The problem i'm actually having is just that I have 1 phone now that will not become active. It will turn on, has the same settings as all the other phones, but I cannot get any green activity lights from it.  I Randomly had this problem...

Hi guys,Yesterday i used CCA to upgrade my UC520W but it failed during the process. Now It won't load up, only Rommon mode. On rommon mode, i have tried at least 6 different IOS downloaded from here but none worked, always saying "error - Invalid ima...

 Hi, I would like to change the greeting on the auto attendant. Can someone walk me through  Much Thanks

I have two slight issues, with my uc520 and cisco 7900 series handsets I have lost the cisco 7920 software, firmware updates and config utilities, i tried to purchase support for them and you can no longer get it so ihave no way of downloading the so...

Hi there,I am wondering if there is any progress of IPV6 for SPA.We use a LOT of SPA handsets (100s) and we have just mandated as a company that all new equipment we buy has to be IPV6 capable... and I really don't want to go to a new handset!Trackin...

I have had a Cisco IP phone SPA508G with a KEM 500DS attached to it since February, 2015. The digital KEM 500DS frequently freezes at completely random times. Sometimes it is when I am using the extensions, sometimes I am not even in the building whe...

HI, trying to find the MTBF on the Cisco SPA 112 phone adapter?

Dear, I Have UC320 with 4 SPA303. From 2 Weeks all received calls via PSTN, after 10 or more second, al SPA-303 restart. If i received calls via SIP/VOIP it all ok. i tried:factory resetanother PSTN Line (from number 1 to number 4)another PSTN Line i...

Hello,I have two SPA502g IP phones connected to a UC320w. I need to check some settings on the IP phone directly, and can't seem to access the admin login. When I click on the login, I am not directed to a login screen and am instead presented with a...

Hi allWe've recently received some SPA502G IP phones and after upgrading to the spa50x-30x-7-5-7.bin firmware, the phone is unresponsive.It starts with the three lights on (mic off / headphones / speaker), then they turn off and the display becomes j...

Hi,I am testing a SPA 525G with firmware version 7.5.7. When I try to reset the phone remotely the SIP NOTIFY with resync is challenged with a 401. Session Initiation Protocol (NOTIFY)    Request-Line: NOTIFY sip:cisco525_1@192.168.2.128:5060 SIP/2.0...