Voice Systems and Accessories - Small Business

Is there anyone I could pay to help setup my CP-7975G IP Phone to work with our VoIP Provider? I have tried so many different version of firmware and configuration files I just can not get it to work. I've spent countless hours testing many different...

Hi Just upgraded firmware on 4 end user phone to 7.5.7bt.   All users reporting poor call quality and 3rd party claim calls are choppy. No other changes have been made. Can we downgrade back to 7.5.6 - that's what we had before. Thanks 

Hi all.  We currently have approximately 2000 122's in service.  That is not an exaggerated number by any means. Over the past few years, we have noticed a rather problematic bug.  These, ATA's, At random tend to lockup in a very specific manner.  Wh...

Hi.We have lots of spa 942/962 with fw 6.1.5a.Now we are also buy spa504g (fw 7.5.6a) and spa525g2 (fw7.5.6), xml dictionaries is updated too.All of them was successfully connected to ldap, but we discover, that phones:942/962 and 504g have problems ...

I purchased a CISCO SPA232D and I just connected.I want to know how to configure the device so that the PSTN line is passing, that can continue to use the analog phone without problems. I noticed that when the device is switched off, the line is pass...

Hi All I am having issues with the softkeys on an SPA504G - SIP mode connected to and Asterisk serverI have reprogrammed the keys extract as below.As per the documentation,but I don't see some of the keys Examples:In Idle - I dont see the last 3 - gp...

HiI have 14 SPA504G with the SPA500DS connected to a generic Asterisk systemEach phone is configured with the Unit Key Configurations belowIf I restart all the phones and do a core show hints, I see each of the hints with 14 watches (after it all set...

Hi - I would like to set up speed dials to SIP URI's (as opposed to a phone number).Does anyone have an example of how the URI is specified in the web config screen and whether I need to then include a dial plan to handle the 123456@xxx.xx.com URI. T...

Hello all,I have just received a cisco business edition 6k and was working on the gateway IOS.I come to a point where I have changed the gateway original configuration and currently not able to communicate from my connected Laptop to the ESX host.I a...

I cannot get my phone to factory reset. None of the passwords i try work and i cannot create a new password. I need help. 

Hello.Can anybody help how to configure MoH on SPA122.I have CISCO 2951 with CME 10.5 with config moh enable-g711 "flash:/music-on-hold.au" multicast moh 239.1.1.40 port 2000 route 10.40.3.240Music play on 7931,7961 phone wthen put on hold from this ...

Hello !Whether there is some way for reboot SPA112 via network using script language? For example remote phone can be reboot by "http://<Phone_IP_Address>/admin/reboot".Kind Regards, Wojciech Krakowski

I purchased a CISCO SPA232D and I just connected.I want to know how to configure the device so that the PSTN line is passing, that can continue to use the analog phone without problems. I noticed that when the device is switched off, the line is pass...

Hi There, We have an IP Phone model SPA525G and we've been having trouble getting the "call waiting" feature to work. I've gone to user preferences on the phone and toggled the call waiting feature on and off multiple times but we still cannot get a ...