Voice Systems and Accessories - Small Business

I've got two SPA112's that can't get calls after a while. Firmware is the latest, 1.3.2.NAT keep alive is enabled, registration expiration is 180s. Things work great and then eventually they just stop, line goes dead, no incoming calls, no outgoing c...

Hi All, I installed a UC320 on my site, and configured Paging feature, but I have some question about this, this feature only works in one way audio? the other memebers of the groups can´t speaker active and response my call??Best Regards

Hi,Can i get some tips to configure and use telephony user interface and voiceview interface on a uc560 ?The original setting seems to not working.Regards,Sent from Cisco Technical Support Android App

Hi,How can we create sip account on a uc560 ?Regards,Sent from Cisco Technical Support Android App

Hello friends. I'm newbie with CME configuration, but now I'm asked to register SPA504G phones onto a CME 8.6 installed on a Cisco 2911 router using SIP protocol. I'm testing with a SPA 502G phone with software version 7.4.7. Within  "voice register ...

I am able to properly use the SPC tool in windows though when I try to run the tool in unbuntu 9.04 it fails. thechet@thechet-desktop:~/Desktop/SPA525$ sh ./spa525g-sip-7-2-3-spc-linux-i386.bin spc --sample-profile config.xml ./spa525g-sip-7-2-3-spc-...

I have a client with a UC320 and approx. eight phones.  This is the way they'd like to setup their system.Incoming calls would ring a receptionish phone for approx. 20 seconds.  Calls no handled by the receptionist would go to the AA.  The AA would t...

Hi Guys,I am facing problem in configuraing call forwarding all  on UCS-540. I have setup call forwarding on cisco phone to external numberSo If A-Party call B-Party(Fowarding configured) , B-party forward it to C-Party however Caller ID set to main ...

Hi, can somebody explain how to configure an VWIC2-1MFT-T1/E1 module via CCA in order to allow AXTEL digital trunk to work wich signaling is R2?Señalización: R2 ModificadoCódigo de línea: HDB3CRC4: ApagadoTipo de señalización: CAS (CHANNEL ASSOCIATED...

Hello All,I am running Cisco IP Communicator with a UC_540.  I have configured the UC_540 for the IPC Extension with the following specs.MAC 5427.1E0A.0810 - MAC of Network Adapter on the LaptopPhone Type - CIPCExpansion Module - NonePreferred Codec ...

One of our customer has an UC520 system with SWP 7.0.2. They want to use new SPA303 phone but this version of sw does not support this type of phone.I read in the document of “UC 500 Software Packs” (https://supportforums.cisco.com/docs/DOC-9827) tha...

Hello,I use SP508G 8 lines phones (7.5.5FW).When a call is incomming, the screen display :From:XXXXXXXXXXXXXXXXXXXwhere XXXXXXXXX is the caller number. I need to display the short name associed to the line ringing like this :From:XXXXXXXXXJohnwhere J...

After a power outage the autoattendant and voicemail are down.this is what i see in the service module itself.any ideas?UC_NDi#service-module integrated-Service-Engine 0/0 sessionTrying 10.1.1.1, 2002 ... OpenCisco Configuration Assistant. Version: 3...

I had someone ask me how many DID's they could have (they're using a UC320 with a Broadvox SIP trunk, no FXO ports are being used).  I have no idea how many inbound routes are supported on the UC320W.  Any ideas?Edit to add a follow-up:  In looking a...