Voice Systems and Accessories - Small Business - Page 218

Best option/way to setup General VM box

We have a UC560 with about 50 users. Most users have personal VM but a few will not. We want to set up a GVM box and set up an indicator on a line button for all phones. We have tried using the floating extension method but then the line button sh...

WAN Port Full Duplex

I have connected my UC540 latest software pack to a FIOS Box. i'm only getting half the speed.Can someone post the steps on CLI to make the WAN interface full duplex please?

Cisco SPA525 Bluetooth link

I cannot get my new motorola s305 headset to link to my SPA525. What would the reasoning be for this?

525G2 Firmware

Hi,Has anybody found the firmware for this phone? I've been shipped some on 7.4.4, and I can't even find the bin for that version online. I've had a few hangs on the phone so I was hoping to upgrade, or at least re-flash with the current version. I c...

UC560 Multisite setup question

good morning all, i recently installed a UC560 for a client on a local site using Cisco Configuration Assistant. Version: 3.2 (2) system details:UC560running latest revision 8.6.1all inbound/outbound calls via siptrunk system is all working as desire...

Restrict FXO ports on the Outgoing Calls.

I need to configure a restriction on the Outgoing Calls, i need the extension that start whit 1 (100,101,102,etc..) to only use the FXO ports 0/1/0 0/1/1 0/1/2 and the extensiones that start whit 2 (200,201,202,etc...) to only use the FXO ports 0/2...

Make call conference

Hello sir, how are you?Look, I am very newbie in the uc560 and IDK how can I make this.My boss want I make a line, as 9980, to all people call and make a conference call. I dont need password and cant put limit of people.How can I do this over termin...

I have an SPA514G phone and need to add SPA500S addon

I would like to know the options to add a SPA500S addon to the SPA514G phone. I am running these phones off a DMS500 CS2K switch.

Setting up General Delivery Mailbox on UC520 w/ SPA 504G IP Phones

I will start from the beginning... A call comes in on one of four FXO lines and the auto attendant answers. There are two options. If the user hits #1, they are forwarded to a Call Blast Group (ext 511) that several users can answer. If the caller...

SPA 50x , ignore multicast paging while on DND

Hello, I saw another person post this question but went unanswered. Is there any way to make a SPA 50x ignore a multicast page while the phone is on DND ? I have tested this with an SPA 525g and this is how it functions already but on any of my...

UC320w SIP won't route to FXS port

I have a SIP trunk (no FXO ports) setup through flowroute with a separate DID for my fax. I have entered my fax DID as a specifed number in the UC320w to route to the FXS port, but it rings through to the same hunt group as all my other incoming cal...

Resolved! Help: How can I see what number is dailed by the caller? (SPA504G & 2 different Sipgate accounts)

Hi,I am Daniel and a complete newbee regarding VoIP and the SPA5xx phones in particular. I hope that one of the pros here can help me out...My problem is that I cannot see if a caller is calling for number A or number B.I have the following setup:- M...

Some SPA phones not ringing when in-use

I am using the SPA 504's and 303g phones in an asterisk / FreePBX environment. For some reason if a user is on the phone and another call comes in, the phone does not ring. I enabled all three line keys on the 303's as Ext1, and all 4 on the 504's....

Resolved! UC560 SSL VPN and Internet Explorer IE9

Hello,I configured my UC560 as SSL VPN server Full-Tunnel. Using Mozilla Firefox 20.0.1 I can reach the login page, log in on it, and download the AnyConnect client without problem. But when I use IE 9, I am unable to reach the login page, look like ...

UC540 UC320 how to interconnnect two offices??

Ok so i have to offices that i want to interconnect with the Uc320w and UC540, the main one has the UC540, i want to make extension calls between the two, in the two i have an equipment that provide dhcp to data lan and the UC's provide the dhcp t...

Voice Systems and Accessories - Small Business

Forum Posts

Best option/way to setup General VM box

WAN Port Full Duplex

Cisco SPA525 Bluetooth link

525G2 Firmware

UC560 Multisite setup question

Restrict FXO ports on the Outgoing Calls.

Make call conference

I have an SPA514G phone and need to add SPA500S addon

Setting up General Delivery Mailbox on UC520 w/ SPA 504G IP Phones

SPA 50x , ignore multicast paging while on DND

UC320w SIP won't route to FXS port

Resolved! Help: How can I see what number is dailed by the caller? (SPA504G & 2 different Sipgate accounts)

Some SPA phones not ringing when in-use

Resolved! UC560 SSL VPN and Internet Explorer IE9

UC540 UC320 how to interconnnect two offices??

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

7841 3PCC LDAP error connecting to server

SPA303 Call History, External or Internal.

UC560 CME toll fraud issue

SPA122 ATA Bells

Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds