Hi, I have a few SPA 8000 and SPA112 TA's, and everything's OK, until I tried to transfer a call from one of this analog lines, it doesn't work.For what I've saw on some info on the web, it's about configuration, but doesn't seems to work. I'm locate...
Hello everyone!I am having some issues with my UC560, when I try to call to the voicemail (499) and AA (500) it just has busy toneFrom the CCA i run a diagnostic and i recived the error messages attachedI just dont know what is happening. I already c...
I have a UC540 with the main line going to a hunt group but when the lines in the list on the hunt group are already on a call the line goes to voicemail without ringing. Is there a way to set it to ring even when the lines are busy? It is a logest-i...
Maybe I'm wrong on this one but you can't connect a UC560 directly to an amp (Bogen) without some kind of paging attendant device, correct? One job we did, the customer already had an "AT&T Page Pal" which connected to the UC560 via an FXS port and ...
Hellowe have installed Callmanager 9.1 on a BE6000 and, by misstake, we configured 8 analogic devices with no licenses purchased for them. The system returned a warning saying that we had 60 days trial period for those devices. That 60 days trial per...
Hi I’m trying to get a solution and not sure if this will work, i have called over dozen of cisco partners in my area and no one seems to know, chat with cisco produced 0 results as wellI have 4 regular analog landlines in headquartersI have 2 satell...
Hi I’m trying to get a solution and not sure if this will work, i have called over dozen of cisco partners in my area and no one seems to know, chat with cisco produced 0 results as wellI have 4 regular analog landlines in headquartersI have 2 satell...
Hello,Do you know which methods the IP Phones use to get configured in order to work on a particular Vlan? (For example via CDP protocol)And also if the phone receives VLAN settings from multiple methods, then which is the priority that the phone fol...
Customer has an issue where 10 digits dialing to a certain number doesn't work. The number does not require a 1 or 0. When you dial the area code + the number the called digits stop at the first seven. I've included a snippet of my dialing peers. ...
Cisco 881 Router config:...ip dhcp excluded-address 10.1.0.129 10.1.0.130!ip dhcp pool PHONES network 10.1.0.128 255.255.255.192 domain-name blabla.com dns-server 10.0.2.11 10.0.2.24 default-router 10.1.0.129 option 42 ip 10.0.2.29 10.0.2...
Does someone know if there is a list/document regarding the Vendor Class Indentifier (VCI) of the SPA5xx Phones?
Dear,phoneA : spa500+spa504phoneB : spa504Pbx : draytek 3510Scenario 1 :PhoneB boot first and registerPhoneA boot second and register=> blf is okScenario 2 : issuePhoneA boot first and registerblf = blink orangePhoneB boot second and register=> blf a...
Every client has a unique request/comment. My current client thinks the uc560 works too well. It's 8.6.2 When the client transfers a call and the caller is dumped to the new receipient, the client thinks it's "too clean", "too perfect". Is there...
Hello,Are Cisco still working on a softphone to work with the UC320W, and the options to configure a phone like the SPA525G phone to work externally, or have both these enhancements been completely dropped? They used to appear on the roadmap for the...
Dear Cisco support, Appriciate you to share any plans for Regional dial plans\settings update. I can't find several countries for my organization like Ghana, Africa. I found lotta messages around the issue but NO solution and most of you just referri...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: