Voice Systems and Accessories - Small Business

Is there a way to ask for user password when connecting to web interface of the phone, but not to ask when accessing directory (and other phone features secured by user password) from the keypad?I want to secure phone on the local network, meanwhile ...

Hi,We have recently set up a UC540 over SIPs. Incoming and outgoing calls are working fine at the moment, the problem lies when a call comes in from an external number.If the UC540 is called from an external number then the phones will ring fine if i...

Dear Cisco Engineers,I want to propose a new cool feature, after my recent experience with my new IP phone SPA525G2 in my office.I have paired my SPA with my mobile phone via bluetooth and I am receiving both my mobile and landline calls in one devic...

I have a SPA 2102 phone adapter with router. I receive no dial tone from my phone, and all cables are connected properly. I have powered the adapter down and waited 30 seconds before turning it back on, and I still receive no dial tone.              ...

I need some help with configuring Dynamic PAT (I think).Here is my setup:-Cisco UC520 runing latest software pack.-Configuration done using CCA-Block of 5 Public IP addresses-2 Internal webservers on port 80-UC500 Internal IP 192.168.10.1-UC500 Exter...

Dear support,i have already purchased a call manager business edition 6000 version 9 without UCSS. how can i order now the UCSS on CCW? what's the top level SKU?Thanks

Hello,I have an intermitant issue with one of our UC320W's running 2.3.2(6) firmware.  The customers VOIP SIP trunk becomes unregistered for periods of time, stopping incoming and outgoing calls.  Once unregistered it takes quite a while to rergister...

Hi,  I have one UC520 and one UC540 with a sip trunk between them. On UC520 I have a SPA508G with a 500S addon. I would like to setup on 500S some buttons to monitor lines on UC540. Is it possible ?Regards

My Company use  BE3000+SPA8800  , and our customers(use Microsoft Lync Phone ) can not dial extension number from PSTN（ it is ok to connect to AA but when type extension number, there is no response）. It seems that  auto-attendant device is not sensi...

What is the secret to MOH sounding good on the cell phone? We have tried the built-in MOH file, tried uploading an MP3 via OfficeManager, and plugged in Muzack via the external port. All sounds good internally, all sound terrible on a cell phone. I h...

We deployed a BE3000 about a year and a half ago. Had a fair share of problems, but thankfully got most sorted out after a while.One problem that has persisted is what could be described as a 'phantom dialtone'. Most often experienced first thing in ...

Can a page be sent to all the idle phones at a site?  Ideally, the customer would like to use phones to broadcast a page throughout a facility. What are the options on a BE3K?*Partner Question*

I have a question regarding the delay from dialing a number till the dialed phone starts ringing. If i dial through the analog phone connected to my SPA3102 the dialed phone rings 3 sends later in comparison with dialing from phone when its directly ...