Voice Systems and Accessories - Small Business - Page 243

Using PSKs on SPA504G to send DTMF tones for Dynamic Call Parking

Hello all,I have seen where questions similar to this have been asked but I haven't found a good answer to this question yet. We have customers with the SPA 504Gs and the current method for using dynamic call parking with our system is a bit cumberso...

Up langage file in SPA 508 Phone

HelloI wanted to up framework and add french langage in my phones.I success up framework but I couldnt up the french xml file in my phone.I try different soft for TFTP client but couldnt connect.And for ftp I dont find login and user.Can you help me ...

Resolved! UC560 phones can dial out but not in T1 PRI

T1 PRI connectionConfirmed with carrier these settings:T1 line coding = B8ZST1 framing = ESFInterface switch Type for PRI - National with FAS (User side) Hunt Type = two way, descending (channel 23 to 1) Switch Protocol = See ISDN PRI switch-types ...

Creating bootable USb Pendrive to reinstall Be3k

Hi, Has anyone reinstalled Be3k or upgraded via USB pendrive?Since i dont have a usb dvd I made the USB bootable with this process from this site:http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/ its freeware.I selected the ISO Imag...

SPA525G2 - Can't see pressed keys/ chars - Connected State

I have CISCO SPA525G2 already deployed at several clients premises (FW 7.5.1a).Unfortunately we’ve found a blocking issue that we hope to solve faster:Fail to show dialed alphanumeric characters in the Connected State, eg: IVR interaction don’t displ...

Cisco IP Phone with Asterisk/Other PBX

Hello,We are wanting to get some Cisco IP Phones (namely the Cisco SPA525G2) at some of our workers homes, which would connect via VPN to our central office which has an ASA 5510. Within our network we have asterisk setup, and some other brand softsw...

incomming Caller ID

Dear Sir vasi here, I am from Kingdom of Saudi Arabia. kindly find the attachment. i am using PSTN Trunks Pls help me out with this issue. I am not getting caller ID for incoming calls it is showing Anonymous. Not having any issue with ISP I che...

Network Topology\Setup

Hi,I’m trying to install a UC320 in to an environment that already has key services already setup. I need the UC320 to handle VOIP/Analogue traffic only. Customer requirements are:UC320 is not to provide DNS/DHCP on any network.Customer already has m...

Cisco UC500 Integration with Microsoft BPOS or Office 365?

Hi,I know Cisco UC has integration with Microsoft Office Communicator and Lync. Not sure if it works with UC500, and not sure if it works with the "cloud" edition, Microsoft BPOS, and/or Office 365?And what is the roadmap for this?John

Door intercom & Door Strike

Has anyone used the Cyberdata Door Intercom http://www.cyberdata.net/products/voip/digitalanalog/intercom/index.htmlwith a UC540 System? Also looking to use this to operate the door strike, does anyone have anything to offer on this?Thanks

UC500 CALL FORWARD to PSTN

outside Caller # my PSTN # 1234567IP Phone # 123Mobile # 0566919592when a user calling from outside to 1234567(AA) transfer to exten 123exten 123 is configured for call forward to mobile so the call is transfered to mobilemobile rings but the no. sh...

Blank IP in CCA???

We have a UC560, when I connect via CCA and try to view the IPs, I get the table showing the Interfaces & VLANs, but the IP cells are all empty???I get the same result if I look at Config->Routing->IP_addresses, or Config->Switching->VLANsIf I login ...

SPA500 dial plan - internal numbers via external gateway

Hi,I've been trying to set up a dial plan to make remote working easier with the SPA500 series (SPA504G in this case). The phone is connected directly to a SIP provider, no IP PBX in between, so this needs to work on the phone itself.What I want, is...

Download location for Smart CallConnector Toolbar or TSP

Hi everyone.We have just purchased and installed a UC540W. I am a software developer and am keen to try and get some TAPI functions integrated with our in-house CRM, in order to do this it appears that I need either the Smart CallConnector Toolbar or...

How to change the incoming number

Hi all,When i call someone, he can see the incoming number is my company operator number. How can i change it, let him see my personal office number ?Thank you!

Voice Systems and Accessories - Small Business

Forum Posts

Using PSKs on SPA504G to send DTMF tones for Dynamic Call Parking

Up langage file in SPA 508 Phone

Resolved! UC560 phones can dial out but not in T1 PRI

Creating bootable USb Pendrive to reinstall Be3k

SPA525G2 - Can't see pressed keys/ chars - Connected State

Cisco IP Phone with Asterisk/Other PBX

incomming Caller ID

Network Topology\Setup

Cisco UC500 Integration with Microsoft BPOS or Office 365?

Door intercom & Door Strike

UC500 CALL FORWARD to PSTN

Blank IP in CCA???

SPA500 dial plan - internal numbers via external gateway

Download location for Smart CallConnector Toolbar or TSP

How to change the incoming number

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

7841 3PCC LDAP error connecting to server

SPA303 Call History, External or Internal.

UC560 CME toll fraud issue

SPA122 ATA Bells

Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds