Voice Systems and Accessories - Small Business

I've got a 3CX system setup on an internal server and 5 Cisco SPA504G Phones. I'm trying to configure the unused line keys on the phones to be Speed Dial, Busy Lamp Field, and Call Pickup buttons for other extensions in the office. This is the setup ...

I have an issue where I have several SPA525G phones set as Dual-Line (Default setting).I need to get the system to issue a busy tone whenever the user is on a call.  At present, as the phones are set to dual line they do not issue a busy tone they ju...

Hello everyone,I am still having issues with calls taking 15 seconds to actually go out after the final digit is dialed.   The Dial Plan was put in place by using CCA.  Can someone take a look?  There has to be something I am missing.  Interdigit tim...

We have a customer that has some users who from time to time will accidentally put the paging DN on hold rather than just hanging up after a page.  The end result is that the multicast music on hold is played on all the phones via a multicast page, a...

I am having trouble getting a phone to register with UC320W. To eliminate extra issues, I have the phone locally powered plugged directly into one of the ports of the UC320W. The phone gets a DHCP address and I can web into the phone. Within the phon...

i have spa2102. I ok for see the first page on my VOip.but i d'nt have de password for login admin... I tried **** 877778# and confirm 1.The password and login d/nt change.Dial 73738# (RESET#)Press 1 to confirm the reset  ,respong "bad passwordi trie...

Okay, I got the 7-5-4 firmware installed for the SPA525G phones.  I did this the conventional way by using a notebook with WinXP and CCA to upload the firmware file to the UC540.This was done to accomodate the Plantronics headsets with EHS (Electroni...

Hi,I can use the Linksys RE1000 Wireless-N Range Extender/Brige with UC320W for increase the coverage ??regards

I've seen only where people have stated they have been able to make this setup work but cannot find any specific instructions. I have found instructions on configuring the VPN on the ASA with no problems but when I go to connect the SPA525G2 I get th...

I honestly feel like my brain is going to explode and I am missing something very easy.Here's my setup...SIP provider coming through the InternetInternet --- ASA --- Switch --- PCs, Phones, UC560From my little diagram, I have my UC560 patched into a ...