I'm using the SPA3102 to forward calls from PSTN toward Voip network. Is working very well with a local Voip Provider called Vono (www.vono.net.br), i think because this provider is one that has outbound proxy. However, I want to use SPA3102 forwar...
The only thing I have heard is 2nd qtr 2013. Well 2nd qtr 2013 is over in one week. We are nearly desperate for many of the features rumored to be in 8.6.5. Best guess on a date? Access to Beta? List of features? PLEASE some...
Hi folks,One of my customers does it's LDAP search queries based on the "company" field. In the result I can display OR the name of the contactpersonen with the corresponding phonenumber OF the company name with the corresponding phone number. The fa...
Hi,I have an issue with the LDAP directory search functionnality on my phone.From what i have read, it is due to my firmware (7.5.4).I would like to downgrade it to 7.5.2.My question is : Is downgrading the same process as upgrading the firmware on t...
Hi,trying to register my SPA112 with Asterisk gave me the message wrong password. Password on both sides were identical, but contained special characters _ and (. Removing these gave me sucessful registering on Asterisk with account information. Does...
I have a DoD office looking to go VoIP but according to DoD it must meet FIPS 140-2 requirements:4.1.2.1. Encrypting unclassified voice is desirable; voice packets across an Internet protocol (e.g., VoIP) shall use encryption that is validated as me...
Hello everyone.I need configure more than 4 scripts in a UC-560, anyone know if you can increase maximum number of scripts through license or the solution is install a Call Manager Express?Anyone know which is the maximum number of simultaneous co...
salve,al momento ho uno SPA3102 ed uno SPA2102 che utilizzo per remotizzare una linea telefonica. Vorrei utilizzare se possibile gli stessi apparati per creare una sorta di linea interna dove un lato chiama l'altro e viceversa.Inoltre vorrei ampliare...
hi all,i want to setup VPN between UC520 in one site and SRP527 in another site.let me know what configuration needs to be done on UC520 and SRP527.thanks in advance.
hello,i use CCA version 3.2, i want to add a cisco mobile ios to the UC520 system so i installed the cisco jabber in my phone but when i tried to add the extension line of the phone in CCA i don't find the type cisco mobile ios with what type can i ...
I would like to disable the prompt: "Record your message after the tone. When you are finished, hang up or press # for more options."I found the „no voicemail conversation caller recording-prompt“ command, but it doesen’t seem to work. Is this comman...
Can you purchase the 3 year warranty coverage on the UC560 even if the unit has been in service for over a year and has never had the warranty coverage? Is there a cost to get it caught up?Thanks!
So it's simple, big building two different companies under one roof. They share/use all Cisco SB switches and each have a UC560. The primary 560 is utilizing VLAN 100 for voice so naturally we set the secondary 560 to use VLAN 101 for voice however...
Hi everyone,I just did a recent installation of the following environment:1- UC320W Version 2.3.2(6)1- SPA880011- SPA509G phones Version 7.5.2(U3)4- SPA500S expansion modules1- SF-200 Cisco POE switchSo far I have everything working the way it should...
Looking at the licensing options for the UC560 and it shows that the UC comes with "24 user licenses, 6 supplemental user licenses". What are the limitations of the 6 supplemental licenses? Can I put 30 users and phones on the system with full exte...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: