Hello, Hope someone here can help me!I bought a PAP2T-NA in a local computer store. It stopped working in half day and now seller won't take it back. The adapter looks really suspect with pealable label, etc. I would like to know whether it is a Genu...
good afternoon all, wondering if someone could help confirm my thinking we recently inherrited a customer contract with a UC560 the previous supplier had messed up the install so we have been brought in to get things working it has been a while since...
Hi all,I have issue when enabling Cisco Jabber for Android. It always say "Disconnected" and with red logo appear in the top of my phone screen. I've been reinstall and also check the device ID to make sure there is no mistake in typing device ID. I'...
Hi CommunityIs SPA112 (ATA) supported by UC540/560
I use asterisk (Elastix 2.4) and Cisco SPA502G phones.After enabling SRTP on the phones I see that the traffic is encrypted but during every call there are 3 beeps at the beginning of the call. Probably this is to let me know that the call is encrypt...
Hello, I am attempting to configure an auto attendant in BE3000 version 8.6.4. The goal is for the caller be able to leave a message. Whether its's a caller input option so that pressing 1 leaves a message or it goes to VM after the AA greeting I ...
Does anyone know how to restrict the UC500 from using specific outbound FXO ports? Presently they have 2 ports; 1 for fax services and the other for voice services. However the dial plan ignores the port status and will squentially access the ports t...
How can I debug/ log my calls for the lines in the SPA8800? I would also like to do the FXO impedence tests on those lines but don't have the option.
Hello,I have the following question regarding the SPA IP Phones: Do the SPA 303G, 504G, 525G support response to “OPTIONS” messages sent from SIP Proxy during Call (in dialog OPTIONS)?Regards, Alex
Hello!Does anybody know how to use FXO lines on SPA8800 to allow users of Business Edition 3000 to make outgoing calls to the PSTN?I have installed Business Edition 3000 and now I have to connect it to PSTN. I've bought an analog gateway SPA8800. SPA...
Is SPA303 compatible with Cisco Call Manager 9.0. There is this big deployment, and we have these 66 IP Phones (SPA303) and I want to know if SIP can work on this phones so they can be integrated with the Call Manager. And, if its not posible, how ca...
Hi,license file is UC520-8U-2BRI-K9 , it shopuld allow just 8 users.My question is what user means?does it mean extension? when I do " show version" I get the following input:14 User Licenses10 FastEthernet interfaces2 ISDN Basic Rate interfaces2 te...
I've installed on Office 2013, Windows 7 x64 and I'm getting an error: The program can't start because ccSIPoid.dll is missing from your computer.Also, the installer never seems to finish. It puts the icon on my desktop, but then minimises to the tra...
This may not initially sound like a UC500 issue, but please be patient with the description.I have a customer that has 2 sites, primary and secondary. They were initially connected via vpn using ASA5505, and all phones registered to a single UC540. P...
We recently installed a BE6K with the VMWare version 5.0.0, 623860. During our configuration testing we realized that the VMWare was not restarting the virtual machines automatically. They were configured originally to start within 2 minutes of the...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: