Voice Systems and Accessories - Small Business

Hi there,Anyone done this upgrade with Windows 8?  We completed the upgrade successfully and everything updated (it seems), except we cannot connect to the phone system on any vlan at this point.  Cisco told me it was because my laptop i performed th...

Hi,I desire give to all my solution for connect a SPA3102 to voip generic PBX as a remote pstn trunk (trunk line in pbx programming), not like a subscriber. In this way you can use LCR rules in pbx and call "in one stage dialing" by your pbx using au...

Good morning to everyone,i write from italy and i have a problem by two weeks. I have bought 2 spa 3102 linksys to make a point to point system. My first 3102 (192.168.0.1) is linked to pstn and then , when the line is voip,it gives the line to the o...

The SPA122 is acting differently than the admin guide suggests in regards to *72 (call forwarding). I want my softswitch to handle the forwarding feature and not the SPA itself. I have removed all internal star codes from the SPA, enabled "feature di...

We are trying to setup a dial-peer over SIP to an asterix server. The provider of the Asterix box wants us to not register.Here is our setup:dial-peer voice 81000 voipdestination-pattern 81...session protocol sipv2session target ipv4:nnn.nnn.nnn.nnnd...

I notice that for BE6K the price to migrate to CUWL(assuming you have CUCM/Unity) is 80. However in CUWL(Non BE6K licensing) the price is only 50. Why isn't there consistency here? It would make sense to charge the same amount of 50 in both BE6K migr...

Do I need a license for every softphone we want to implment? QPT is saying just 1 is needed but that doesn't seem right.

HI All,I have a strange problem with the phone in the object.The phone is installed on a vessel, it's configured well because is functioning very well.The problem is that after two or three days the phone becomes inoperate, that's to say if I get up ...

I need to set up an outgoing dial plan.  I am using "8" to seize an outgoing line For area code 913, a user only has to dial 7 digits, for 816, they need to dial 10 digits.  so in my case I have a local outbound 7-digit dail plan of 8[2-9]xxxxxx that...

Here's the scenario - customer operates two different companies out of the same location. The calls come in on two different PSTN hunt groups, but they all will come straight into the AA. The AA menu will ask the user to select the company they are t...

Here's the scenario - customer operates two different companies out of the same location. The calls come in on two different PSTN hunt groups, but they all will come straight into the AA. The AA menu will ask the user to select the company they are t...

How can I configure a SPA508 phone so that it will not answer multicast group paging when on do not disturb?group paging was configured with the following line on the xml config file:<Group_Paging_Script ua="na">pggrp=224.168.168.168:34562;name=Panic...