Voice Systems and Accessories - Small Business

I have a few 525G2 units running 7.5.3 and they are provisioned using .cfg files located on a http server, i have no real issues but a few months ago i came across a problem where none of the phones would process the .cfg files.I located the reason f...

Guys, I have a site where cca can not authenticate with a uc520. It states authentication failed and TELNET access was denied. Of course I can manually telnet into the device. Anyone see this before? Sent from Cisco Technical Support iPhone App

Can anyone explain me why we need call preserve in H323?????????voice service voiph323call preserveConfiguring media inactivity detection to avoid hung calls is highly recommended.after configuring the call preserve in voice service voip i got the ab...

Hi all.I have read a lot of documents and applied configuration changes to the voice-ports in my UC-520 but until now I can not get to work the incoming Caller ID function; I think it is a matter of matching parameters with my telephony company: Telm...

Having issues with License registration on BE3000. Get the message attached.Help??

We recently purchased 15 504g phones with 500s attendant consoles.  We have a Ring Group (extention 300) which rings the sales phones (5 extentions) when an outside call comes in.  I would like to be able to answer that group should someone be in ano...

Hello!Are CMBE 3000 support wireless IP phones 7920 or 7921G?Thank you!

Hello,I can't seem to be ab;e to edit the default Inbound Calling Route. I also can't seem to be able to add a new one since the button is disabled. Any ideas? TIA.

I have a client who says he has seen this before on a UC520 w/ 7975s, and he wants it repliated on his UC540 w/ 7975s. i.e. an incoming phone call from an access gate on an FXO port would cause the phone to ring, and force a page flip to a services U...

A customer of ours already have a Cisco SPA501G phone, which was – by the old provider – set to disable administration webpage and password-protect the factory reset action. Is it somehow possible to hard reset this? Or is the phone worthless?

hii've configured (with forum and cisco support) my spa3102.i want call PSTN number from my pc (with xlite) connected trought vpn to the spa3102.i've:xlite (on my pc, vpn kerio addr 10.189.229.101)  <---->  (public addr) ) vpn server  (lan addr 192.1...

Greetings...I would like to know if I need to order a specific part number for the Cisco IP Communicator when ordering an UC500.I know the part number IPCOMM86-SW is for the specific software, but it is a top level with a cost of $0, and when you con...

Is it possible to disable the 2nd line on a primary extension number?ie if the person is on the phone the caller gets an engaged tone and/or diverted to voicemail.