Voice Systems and Accessories - Small Business

We provision our SPA 122 ATAs via a provisioning server. We have been using this method successfully to register our ATAs with our voice server. For the past two days we have been unable to register any 122 ATAs. The ATAs are pulling the configuratio...

Hi All,I have an analog phone on a FXS port - and I'd like it to be able to go offhook and make outbound calls without having to dial 9 first.This phone has no need to dial other extensions ... it just makes calls outbound to the PSTN.Outbound to PST...

I have a question regarding an ATA 186. I want to connect this ATA 186 to a UC540 wich is on another location.We have a Cisco 887 on the remote location and i want to make a IP SEC tunnel between the UC540 and the 887.Is this possible? If yes can i g...

Hello,I am intrested in learining more about the the be 3000. I am fimliar with the uc 540 and I know if has the Smart Call Connector Suite.Does the BE 3000 have complimenting product like the Smart Call Connector Suite?

Located in the Jacksonville, FL USA area, cannot seem to create a dial plan for 7 digit dialing. Area code is (904) and I don't see an option where to change from 10 digit to 7 digit outbound dialing. Am I missing something?                  

Hi All,Just a quick question around the hardware components of the UC500 series:1) Is it possible that future models have Wifi capabilites of high speed data AGN2) Will the POE ports be 10/100/10003) Is it possible that future models will have USB po...

Dear All,One Customer of mine are facing strange problem with Cisco 7931 IP Phone. They have Cisco UC540 configured with Cisco IP Phone 7931 model. Sometimes (60% of the calls) when the phone's in connected mode, the Transfer softkey disappear from t...

Hello,I wanted to make simple PoE installation for SPA922 phone. I bought 48V adapter and connected negativeto pair 7 and 8 and positive to pair 4 and 5. But no luck, phone doesn't work, but blinks it screen whendisconnecting.I was wondering if SPA92...

Hi I have UC540 with 8.6.0. software pack and CCA 3.2.1 and trying to configure auto attendand, when I key in the AA extension and move to the next field on the screen, the AA extension box becomes red,  if I click on apply or ok button the "There ar...

Hi Is it possible to change SSL VPN port number from 443 to other ports such as 4443 on UC540 ? Will SPA525 remote phone still work after this change ?The reason I need to change the default port is because 443 port was used by  the exchange server b...

I have successfully configured two SPA3102 to deliver remote dial tone. (CO Line)----[SPA3102]===={IP Network}====[SPA3102]----TelephoneWorks fine calls in or out using dial tone from a Rhino Channelbank.This does not work so well(Panasonic PBX Analo...

I have a client who has a 100 single MCS server based Business edition running version 7. Currently they are covered under UCCS/ESW nearing the end of this 3 year agreement.What is the correct migration path to take them from V7 to BE6k on UCS.  Look...

I started the deployment of our BE6K - 9.0, deployed CUC, UCM, CUP, UPM, and had no issue with pre-loaded images, ova's, etc.I'm trying to deploy the OVA for VCS, however it fails with the following error:       I have re-downloaded the OVA off the l...