Voice Systems and Accessories - Small Business

Ola, estou com 2 pap2 bp bloqueados por não saber a senha do administrador, não consigo configurar na minha 3cx.Alguma forma de ajuda? Hello, I have 2 pap2 bp blocked for not knowing the administrator password, I can not configure it in my 3cx.Some h...

Brand new device (purchased from Amazon)Firmware upgraded to 1.4.1SR1(002)Factory resetProfile_Rule set using /admin/resync?http://server/init.cfgSome parameters are set including Profile_Rule_B, Profile_Rule_C, etc (all configs pasted below)Device s...

I have an SPA 112. I have two Sip coming and 1 DID. Both ports are active and registering however the calls that come in through Voice Port No. 1 when its busy Voice Port No2. doesn't ring? I am not sure how to fix this issues? All I need is that whe...

The SPA100 Provisioning Guide contains a chart of valid Time_Zone values for some timezones (https://supportforums.cisco.com/docs/DOC-26259), but there is no specification of what the values mean.  The default value is "-08 1 1".  The first number is...

Is this possible if so how?

I purchased a SPA 303 IP Phone and have Google Fiber internet. When I hook up my phone to my Fiber box, the phone screen reads "Initializing" but then nothing happens. There's no dial tone. 1. Is the SPA 303 IP Phone compatible with Google Fiber? I a...

I have a Cisco CP-8861-3PCCSoftware version sip88xx.11-0-0MPP-7.loads When I put the handset on hook, it keeps going "off-hook" and then back "on-hook" as if I had picked up the handset, or it was not properly put on the cradle.  It is as if the hand...

Hello! I have the following dial plan in a Cisco ATA with Router SPA122: (99999 | *xx*xxxxxxxxx.# | *xx*xxxxxxxxx.*xx# | *xx*xx# | #xx# | <:0224>[2-9]xxxx. | <:0224>1[02-9]xxx. | xxxxxxxxxx.) Is there a way to modify it to avoid the following?:1. Int...

SPA9000 ver 6.1.5 tries to register into ITSP every second when STUN server options are set.Register and inbound calls are sucsesfulSysLog Server shows:<151>[5060]STUN trying 0<151>[5060]STUN trying 1<151>[2]REG: STUN c0a80148->ba5c9a64, 5060->5060<1...

Can Cisco SPA122 box work as SIP gateway?My PBX (SIP Only) cannot understand format what the sip provider specifically requires (P-Asserted-Identity with specific format) but SPA112 can.So what I want is I want to connect my PBX to LAN port of SPA122...

I've noticed that dual registration does not seems to work using TLS or TCP, instead of UDP signaling.  Has anyone else seen this?  There is nothing about it in any documentation.  I'm wondering if this may be some type of limitation of TCP and not n...

Good afternoon, been trying to locate the download for the Cisco UC540 Configuration Assistant with no avail.  Can some one help? Thank you

I have a UC540 which I cannot connect to with my laptop running the CCA Tool, nor can I ping it at 192.168.10.1. I have recently copied and pasted the config back onto the unit using the Console port. All the Ethernet ports are flashing, but when I c...

Hi, my SPA 3000 dont work, have only the green light on.The code **** dont work, dont get ip. nothing. Oi, meu SPA 3000 não funciona, tem apenas a luz verde acesa.O código **** não funciona, não obtenha ip. nada.