Voice Systems and Accessories - Small Business

Hi Members, I have a site with a UC540, this is an experimental site and fictious. I have setup this system in our training room and ordered its own Lines though a carrier.The ISDN is through Telstra. I have setup the Dial Plan for Australia and the ...

Hi team We are planning to install UC320W for my client and we need to bring 3 PSTN lines form a remote office and send 3 FXS extensions back to that office, we don't have any VPN tunnel in between both locations, We are planning to use NAT in router...

Can someone help.Have a customer that had a power problem and now the UC540 will not boot up.Can get into CLI and when show flash there is only one file which is UC500-advipservicesk9.......Should there not be a startup config file?How can we copy th...

We want to to route calls between 2 systems on a local lan. Each system will have their own subnets and vlans through a port on an ASA5510.Currently the multi-site wizard wants to create a vpn for this connection through the wan port, but as we use a...

Hello need help about a call back in UC500.from Internal to External Ip Phone --> UC520 -->GSM Gateway(2N voiceblue lite)     OK!!from externalmy GSM number--->GSM Gateway (2N voiceblue lite) -->UC520  {cue auto attendant number } -->ip phone   OK!!!...

HiA client of mine has purchased the extended 3 year service for the uc320w, what is the best way for them to contact cisco support if they have a problem. They are based in NZ.Thanks

Good morning,I am Italian and my problem is related to two Cisco SPA 303 I bought during my last trip in US and connected to my Router PBX Fritz!Box 7390, all incoming calls, locals and externals are received in the right way, while for outbound call...

Hi everyone,I've an UC560 with 4 FXS ports built-in.In 2 of the 4 ports of the UC, I've configured 2 stcapp phones.After  some time of use, these 2 ports became unavailable, so I've to make the  command "shut" and "no shut" to return to life these 2 ...

Today we are removing the 2.2.0 from the Cloud and CCO due to several bugs found in this image.   If you are currently running 2.2.0 and are not experiencing any of these problems, there is no need to downgrade the firmware.  The engineering team has...

WHAT:Today we are announcing the General Availability of the Cisco UC320W 2.2.0 firmware feature release.  Features and bug fixes are described in the 2.2.0 release notes found here.WHEN:The 2.2.0 firmware version is available via the Cloud today.   ...

I am working with a customer that is using the Cisco Smart CallConnector Advanced Client (version 2.01.012).  Everything works like it should; except that when users have their presence status synced with their Outlook calendar that status does not u...

I'm very disappointed in UC300 series because Cisco seems to forget some basic features.Long wait for firmware release 2.2 and big frustation because it doesn't fix some important things I would remind you that still don't make automatic outbound cal...

I am trying to understand the Simple Cisco Unified CallConnector Personal addition application on UC540. Is a licesne required?

I started a new position that has me working from home using a VOIP linke through the SPA 2102 phone adapter. I cannot seem to get it connected to my E4200 router. I don't think either can see the other. Can someone familiar with this help me?