Voice Systems and Accessories - Small Business - Page 510

UC320 Fax support single FXO line

Does anyone know what fax support is available wih the UC320W? In particualr I am referring to distintive ring.What I have is a service with Bell Canada where the single business FXO phone line has two numbers associated with it. One number for the...

UC500 Octo-Line Common Applications List

Hi Team,Does anyone have a list of common features and applications on the UC500 platform that require Octo-Line phones to work properly?Ideally, we're looking for a grid that will have something to this effect:Feature/ApplicationLimitation with SPA5...

Voicemail to Email Notification for General Mailbox

I have a UC 540 running 8.1 and the users were requesting voicemail to email notification for a General Delivery Mailbox. The users are a part of the Blast Group which has the GVM, but inside of voicemail notification in UC and CUE, there is no opti...

Auto-Attendant Voice mail issue

I have a UC520 running an Auto attendant.DDI is provided by skype.When you call in on the DDI the AA plays the message, if you select option 1 it will ring an extension. All this works fine.If the extension ring no answers to voicemail you hear silen...

octo-line config for barge UC520

We have the following configuration for shared lines as overlays on UC520. I tried to change the overlayed lines to octo-lines for barge support but this is not configurable. I'm not sure if this would even be a good idea but was going to see the o...

SPA9000, SPA400 & SPA502 SYSLOG DEBUGGING

Hi, Ive setup a syslog server and pointed all my devices to it. The SPA9000 & SPA400 & 4x SPA502's. But how can i identify what device is logging what? They all have the same hostname, My syslog server is not on the same LAN its running accross t...

Call Transfer, Blind and Consultative behavior

Question: When one transfers a call by first hitting the transfer softkey, then pushing a button which is a monitor button, the result is a blind transfer. When I do the same thing with a speeddial button, the result is a consultative transfer. Can...

Unified Callconnector re-activation

HelloDoes anyone know the process to reactivate the Unified Callconnector client when hardware changes ?My customer have many UCC PAK, one per laptop, and a Callconnector Server v1.6 with a UC560.For security reason, he used to reinstall the OS every...

How far will a FXS run to a remote phone on UC320W

Hi Joel,I posted the answer here from a product engineer, because it is very relevant to other folks who probably have the same question.There should be no problem ringing a phone(<=1 REN) with 1200 feet 24AWG wire.UC320W has higher ringing voltage(...

Call fwd All is not working

Is anyone have any idea why call forwad all is not working? call comes in and says it has been fwded and than hang no other action.pl. help.As well after removing cfwdall still AA answering this extension has been fwded and it ring on right extension...

UC320w external call to aa prompts

UC320w external dialingHello I am working on a uc320w with firmware 2.0.6 (10) making a day and night auto attendant. I have already recorded my prompts for day and night and have done the work to make them be in the order we need them to be. Now whe...

Resolved! UC540 Dual WAN - Again

I am trying to set up a dual WAN configuration on a UC540 and have followed Marcos Hernandez's DOC-1620 (which isn't 1620, there are a lot of bad links in these forums). I haven't had any success.I can ping the primary ISP gateway but I can't ping t...

Using SPA504G

Hello,I have SPA504G with SPA500S(expansion module). I am using Asterisk 1.7. I am little confused when I get more than one call on SPA504G. I am unable to transfer a call to a particular destination when using the sidecar SPA500S.Here is a simple sc...

No call park key in SPA504G 7.4.8 firmware.

I did a factory reset and then configure my SIP account.Here is my connected key listhold|1;endcall|2;conf|3;xfer|4;toggle;bxfer;confLx;xferLx;park;phold;flashI believe it's the default value, because I never touched it.However, it's not showing park...

SPA9000, SPA400 & SPA502 SYSLOG DEBUGGING

Hi, Ive setup a syslog server and pointed all my devices to it. The SPA9000 & SPA400 & 4x SPA502's. But how can i identify what device is logging what? They all have the same hostname, My syslog server is not on the same LAN its running accross t...

Voice Systems and Accessories - Small Business

Forum Posts

UC320 Fax support single FXO line

UC500 Octo-Line Common Applications List

Voicemail to Email Notification for General Mailbox

Auto-Attendant Voice mail issue

octo-line config for barge UC520

SPA9000, SPA400 & SPA502 SYSLOG DEBUGGING

Call Transfer, Blind and Consultative behavior

Unified Callconnector re-activation

How far will a FXS run to a remote phone on UC320W

Call fwd All is not working

UC320w external call to aa prompts

Resolved! UC540 Dual WAN - Again

Using SPA504G

No call park key in SPA504G 7.4.8 firmware.

SPA9000, SPA400 & SPA502 SYSLOG DEBUGGING

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

7841 3PCC LDAP error connecting to server

SPA303 Call History, External or Internal.

UC560 CME toll fraud issue

SPA122 ATA Bells

Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds