Voice Systems and Accessories - Small Business

Dear All,is it possible to use SPA3102 to convert fax signal incoming on FXO port to SIP on t.38.Let's assume that we have fax incomin on PSTN line and we don;t want to recieve it on the fax machine connected to fxs port of the SPA3102, but we want t...

Hi,I recently installed an UC320W to a Customer in Mexico. He wanted to report a problem with one of his analog lines to his service provider (Telmex) and in order to do so, he must dial "050". When he enters 9 + 050, he gets an "invalid number" mess...

Hi All,I was wondering if anyone could shed some light on this problem.I have 80+ SPA942 phones running on a 3CX v10.0  SoftPBX system and have had no problems so far.I was tasked with supplying some new phone but keeping withing the Linksys/ Cisco f...

Greetings, forum.I recently installed a PAP2T in my home, connected to Callcentric. It is working fine for us, except for one thing.I've noticed that every morning it reboots with reason H633a08fe.  Its running software 5.1.6(LS) and its hardware ver...

Anyone know how to block the caller ID on one SIP DID?I see the setting to set what number you want to use for the DID outbound calls but not an option to block the caller ID.Anyone know how?Thanks!

I'm currently testing my new SPA508G phone and everything seems to work fine except that the name of the caller is not displayed on incomming calls although the telephone number and name of the caller are in the Personal Directory. The phone seems to...

HelloI have a Linkxyx SPA-962 with a custom BMP background image located on a local TFTP server. The image displays correctly, but its displaying an older version of the image, that no longer exists. I have tried using a different image, and rebootin...

Good Morning, following a restoration of a backup file onto our UC540, we have a handset (SPA504) which is failing to register and displays the message:-DownloadingUser_Define_4/This handset was working perfectly well before we defaulted the UC540. T...

Curious if anyone knows if the updated timeline for release Jan 2012 will still stick this time....customers asking for new phones/features...Thanks!

Hi Guys,This happens to me from time to time and I was wondering if someone can explain why. When I try to upload my phone firmware, I download the zipfile, unzip and drag the .bin file to the UC540 icon in CCA 3.1(1). The TFTP upload begins then fai...

Hi, I have a problem with registerting and updating the firmware for the SPA303 with UC560. IOS version: Version 15.0(1)Software Pack: 8.2As I added the SPA50x-30x load files using the CCA 3.0, I only can see the SPA500 series in my UC (which all 504...

Hi All,Very new to this so treat me gently please.Just installed a UC-560 on one of our sites, internal calls are fine and everything works as it should, however external calls are suffering from poor call quality or even dropping the call entirely m...