Voice Systems and Accessories - Small Business

Dear community,I recently setup an UC320 system with success, and I glad to use my old PAP2T ATA to extend the number of FXS ports.I saw another discussion herehttps://supportforums.cisco.com/message/3352600#3352600where it seems to be non compatible...

Dear community,I'm kindly asking a suggestion for this situationSITE A ---- VPN ---- SITE B ----- VPN ----- SITE C PBX                  PBX                    PBXISDN A               ISDN B                 ISDN CEach site has got its own phone lines ...

I have been having hundreds of very short international calls being placed. My telco tells me that the calls appear to be legitimately coming from our UC540 (through sip trunk).I have checked all of our user handsets, as well as questioned my staff (...

I have installed a few UC320's over the last few weeks... every single one has encountered the same bug.They all came with factory firmware of 2.0.12, so I had to upgrade to the latest. I did this with ZERO phones plugged in, BEFORE there was any con...

To get an high security level we ask you to implement/improve the remote access ip address filter to the web gui in all voice gateway equipments (SPA2102, SPA3102, WRP400, etc).Now, this simple ACL mechanism is not present in small devices like SPA21...

Hello,I have problems with Pickup function on SPA504G and asterisk server 1.4.30I have configured functions  blf, sd, cp on lines 2-4(regarding http://www.cisco.com/en/US/docs/voice_ip_comm/csbpipp/ip_phones/administration/guide/spa500_admin.pdf) (gr...

Hello everyone,   I have a problem with my UC 520. The question is as the title says. This is a lab environment. I connect the UC520 to a 3745 using T1 PRI. I have a CIPC register to the 3745 and a 7941 phone register to UC520. The CIPC can call 7941...

Hello ,We have UC540 & UC560 running 8.2 OS and the CCA ver is 3.1.1. local area code:-- 01XXX (5digits long)local phone numbers:- 6XXXXX (6 digits long)Just now all our users have to dial the full local area code + phone number to make a local landl...

Hi Cisco Team,When trying to load the CUCCM (For SCC) it hangs on "Establishing database connection to localhost" and I cant work out how to get it past that...Has anyone experienced this before and if so how did you get past this?Cheers,David.(PS) I...

Hello,I am installing Asterisk at our site in Bonaire, Netherlands Antilles. I have a dozen or so SPA504G's (brand new) that are pre-loaded with 7.4.8a firmware. I have tftp set up to direct their tftp server to my Asterisk server which runs TFTP.Wha...

Hello:We have been installing new Cisco IP phones and switches into our existing network.  To that end, we have been replacing some older Cisco 3560 24 port PoE switches with newer 3560X 24 port PoE switches.  So far, I've replace about 15 3560 switc...

Hi there,It's possible to configure SPA502G on Cisco Unified CM 6.0.1? Using SCCP or another protocol?Regards,Pedro

IS there a way to specify a SIP domain name on the authentication for a SIP trunk? Our provider requires this to be present.. The old admin guide  says it was there where has it gone?

From an SPA504G (for example) is it possible to set/unset call forwarding for all inbound calls to a group to another defined group/extension?