Voice Systems and Accessories - Small Business

Has anyone got a download link for the UC540_8.2.0.zip ?It seems to be missing on the software pack website. The readme file for 8.2.0, but only the software for UC540_8.1.0.zip on listed on the website.The 520 and 560 have links to the 8.2.0 softwar...

I have a simple question and I hope I will get a clear answer:Were is the new firmware of SPA3102?When do you (Cisco) will issue it?Have you any developer who can solve the CID problem of Sipura hardware?--- OR ---I have to choice other product (of c...

To simplify it:- two FXO ports- one IP Phone should dial out through one FXO port (trunk group 1)- second IP Phone should dial out through second FXO port (trunk group 2)I can do this with COR in CLI, but don't want to do it because of CCA and suppor...

after a change of setting (an extension in theSPA932 consolle) the phone don't reboot correctly (  the display blink, all the lights are turn on and is unreachable from the network).... i have remove the SPA932, use an external power supply... but no...

HiSo ive turned on the remote login via https on, and as far as i understand i should be able to login via my wan ip address on my uc 320w which is 192.168.1.6, so should i be able to test this internal on the network by using https://192.168.1.6:808...

Hello,I just purchased a couple of SPA504G phones. I was wondering whether setting the BackLightTimer option to AlwaysOn  (= having the screen constantly illuminated) will have any adverse effects to the LCD screen in the medium/long run, ie. screen ...

I have a small office with (3) SPA 942 units. They are attached to a Cisco E3000 router running DD-WRT v24-sp2 (04/09/11) voip. I'm running this version of DD-WRT because it includes a version of the Milkfish SIP router which compensates for the lack...

Hi all,Our company is located in South Mississippi and our customer base spans three different area codes, two of which are 7-digit dialing areas.  We use Metaswitch as our switch provider, which includes a provisioning system.The issue we're experie...

I've got an issue with a Cisco SPA500S attached to a 504G.  Randomly the lights on the side car will go out for some time, usually until the user that is being monitored makes or recieves a call.  It seems to be either a configuration or network issu...

I have a UC520 that needs to be upgraded.  It's running an older version of software -IOS version - 12.4(11)XW9CME - 4.2(0)CUE - 3.2.1I'd like to put the latest software on this hardware - 8.2.0What is the best way to do this?  I understand it's many...

Hi Folks,I'm having trouble here, I have extensions on 4xx, voicemail pilot is 499, transfer direct to voicemail working fine by dialing a '6' prefix, ie if I require to transfer directly to mailbox 410 I can dial 6410 from any phone and it works jus...

Hello,I configured a UC560 with the package 8.1.0 and set up the B-ACD in drop-throughEverything works fine - only one problem ...The UC is located in Germany and I use the german localization packageand all call progress tones are german.But if some...

WHAT:======UC320W  2.1.1 General Availability feature release firmware contains country support for Australia, Austria, Canada, Chile, France, Germany, Hong  Kong, Ireland, Italy, Mexico, New Zealand, Portugal, Singapore, Spain, United Kingdom and Un...

UC540/560 running 8.1 or 8.2, with CCA 3.1 configuring Multisite.  Where are the definitive configuration steps for this?  Old versions have you removethe 0.0.0.0 0.0.0.0 route statement, these versions don't seem to work without it.  We've got four ...