Has anyone gotten a gmail smtp server to work with the UC500? I am having trouble finding a server that does relay.
Has anyone gotten a gmail smtp server to work with the UC500? I am having trouble finding a server that does relay.
So the UC-520 blew up on an upgrade and after working with TAC to recover from that, it was just quirky. Decided to just blow it all away and start from scratch. Everything seemed to be working, but my DIDs don't ring their assigned extensions, but...
We have installed a new UC540 with the 8.1.0 service pack. With earlier service packs/firmware, the user was able to input their personal speed dial inside of the web GUI. This doesn't seem possible now. There is also no option to do so inside of ...
Hi all,It's about MWI_Serv and VMWI_Serv parameters.I tried to use these 2 parameters without success: spc error: unrecognized parameter name MWI_Serv[1] spc error: unrecognized parameter name VMWI_Serv[1] I would like to know if with spa303 I can ...
Hi,One of our customers has 4x SPA962 each with 2xSPA932. They randomly restart with various reboot reasons.C4 is one I cannot find in the 'reboot reasons' list (I asked this question there but realize I should have opened a new discussion).Strange...
Hello,We have SPA8800 configured according document: I have 2 questions:1) (problem): Calls from anyone using a SIP Soft phone on a PC can route calls to the PSTN on the FXO ports: Is there a posibility to restrict only to Ip form Asterisk server? I ...
when a call is made from a pstn network to the sip, there is no ringback tone heard. From sip to sip it work good. i included the running config.
This SPA504g phone had power issues when upgrading its firmware. I have tried using spa50x-7-4-4-recovery which gives an error "Recovery Failed: Cannot find the specified device!".The phone and PC are on the same subnet (10.50.60.0/24) and i have tur...
Hi Guys,I am hoping to replace an existing product ime with the SPA2102 phone adapter but I need to know if it is possible for us to make configuration changes etc to these devices via TFTP configuration file uploads as we currently do with our Grand...
Hi,Need help provisioning SPA303.FW: 7.4.7Model: Cisco SPA303 Have set up the profile rule: http://company.com//linksys/$PN/spa$MA.cfg, however upon boot up, device does not even request or point to that url instead it requests for:Read Request, File...
Hi All,I'm not able to set my SPA6901 and SPA508 phones with Cisco Assistant 3.0.When I set the IP address of devices for search, are prompted user and password (Please enter your username and password for realm "Admin" on "192.168.3.251"). Which use...
i have try to setup the uc520 auto attendant , but suddenly it just no able to function. All call goes to AA straigt to busy tone ? Anyone know how this happen ?
We have a potential customer with three sites. We are quoting 3 x UC560. Could you please advise on deployment of Smart CallConnector in this scenario. The documentation says it can handle 1 - 5 sites, but it's not clear how. Is it possible to deploy...
Does anyone know if the Linksys SPA3102 exports or can export logs of user activity for security status monitoring to a syslog server. We are looking for information to meet NERC CIP compliance.
Our SIP provider currently requires that we dial with a 1-XXXXXXXXXX even for local calls. Curious if its possible to allow a dial-pattern to add the "1" to the front of a standard 10-digital phone number.I don't see any way to do this with the CCA a...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: