Voice Systems and Accessories - Small Business - Page 698

Skype SIP Trunk Has Delay

One thing that I am noticing with my Skype Sip trunk is that there are some noticable delays:When I have finished dialing the number, the UC500 starts ringing however it will ring about 3 times in my IP phone before the number I am calling begins to ...

Transfert d'appel

Salut,J'ai un soucis de transfert inconditionnel d'appel vers l'exterieur en interne pas de soucis tout fonctionne correctement.une idée merci

Smart CallConnector Operator

I've been reading the whitepaper on this application, but I hear it hasn't been released yet. Just wondering if anyone heard a release date or knows of a demo/beta available?

7931 IP Phone seems to stay muted or mic disabled/broken

We have a customer with a 7931 that either is stuck on mute, or the phone mic is either broken or disabled somehow. This is using the normal handset, speaker phone, or with a headset. Tried power cycling, switched headsets and handsets. Are there any...

Resolved! Basic Config question

Can I connect a SPA504G phone to a UC520?

Can this scheme be implemented with an AA script?

Good day,we are looking at implementing the following scheme for incoming calls on a UC520:1. Incoming call is handled by IVR2. IVR puts call on hold/park3. A prerecorded notification is sent via overhad paging by the IVR4. Call is picked up by userC...

Resolved! Does the UC560 use the ACS-3825RM-19= rack mount kit?

I know that the 24-user UC520, 32-user UC520, 48-user UC520, and the 3825 ISR all use the ACS-3825RM-19= rack mounting kit. Does the UC560 use this rack mounting kit, or is there a different part number for a UC560 rack mounting kit?

SPA5xx compatibility with WAPPOE

Is the SPA5xx line (and by extension the SPA9x2 line) compatible with the Linksys WAPPOE modules in any way? I see two scenarios where this might work:1. The phone itself is 802.3af compatible, so will the Injector part of the WAPPOE talk 802.3af di...

SPA922 with 2801CCME - CallPickup not work

Hello everybody,I have a CISCO2801 working with CallManager Express and IP Phones SPA922, however, can not operate the Call Pickup, the option does not work * 36.Could anyone help me?

Incoming FXO Calls - Destination CO_LINE

We have our system setup for incoming FXO calls to go to the CO_LINE destination type. In CUE, the extensions the system setup for the CO lines are setup to go to AA after 20 seconds.Whenever I add a new phone to the system and assign buttons 2 and...

Port forwading

We are using dynamic ip in our site , with the help of dyndns we can use RDP , FTP, etc , while doing the port forwarding to UC 500 ,we cannot connect using cisco vpn dialer , but applications like telnet ,ssh will work properly , we created dmz...

Resolved! "all circuits are busy" - Internal Sever Error

I am trying to figure out a recent problem. I have one SIP trunk.If I am on the phone and a call comes in I get a the message "all circuits are busy" (not from my uc500)Any and all responses appreciated.Here is the message detail:UC520#debug ccsip me...

Resolved! Skype for SIP Configuration

Hello,I've been trying to get this Skype for SIP trunk configured but have had no success. Can't make or recieve calls although the SIP trunk is showing as registered.Debug ccsip messages shows the following output. I highlighted some errors messages...

UC500 SIP Trunk Back to Central CUCM 7

I am looking to setup a UC520 so that it can travel to where it is needed and be deployed for temporary use. I am wanting it to build a SIP trunk back to my CUCM 7 cluster. Has anyone ever tried this?Thanks

CP7945 and video not working

Hi,I have a teleworker setup using two 5505's and at the remote site I have a 7945 with a laptop plugged into the PC port on the phone. I am trying to get video working but Video Advantage does not see the 7945 even though the PC is plugged into it. ...

Voice Systems and Accessories - Small Business

Forum Posts

Skype SIP Trunk Has Delay

Transfert d'appel

Smart CallConnector Operator

7931 IP Phone seems to stay muted or mic disabled/broken

Resolved! Basic Config question

Can this scheme be implemented with an AA script?

Resolved! Does the UC560 use the ACS-3825RM-19= rack mount kit?

SPA5xx compatibility with WAPPOE

SPA922 with 2801CCME - CallPickup not work

Incoming FXO Calls - Destination CO_LINE

Port forwading

Resolved! "all circuits are busy" - Internal Sever Error

Resolved! Skype for SIP Configuration

UC500 SIP Trunk Back to Central CUCM 7

CP7945 and video not working

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

7841 3PCC LDAP error connecting to server

SPA303 Call History, External or Internal.

UC560 CME toll fraud issue

SPA122 ATA Bells

Cisco 7970 won’t pull firmware, DHCP Request every 20 Seconds