Please help,I have UC540 and as soon as I configure a SIP trunk, my AA and Voicemail are no longer reachable (internally or externally - I get busy signal) but internal and external phone calls work perfectly both directions.-I ran debugs and the dia...
Running Server 2.0.0.89b, Operator 1.6.0.16, using 525G phone.After logging into operator, says "The phone has been disconnected. Status Code:-1.How can I fix?PS. I get same message when trying to use 504G phone, which I KNOW is not supported as Oper...
We have a situation where voice vlan is vlan 2 at a client's site. We want to insert a UC540 into the network and keep the same VLAN 2 for voice - from CCA 2.2.5 it doesn't appear to be an option.please adviseThanks
We have a operator using a 7975 phone with 2 x 7916 side cars. Periodically, the transfer softkey stops responding. The only way to fix it is to reboot the phone. I replaced the phone but the problem is still there.Does anyone have this problem an...
Hi!I have a problem with NAT and enabling NAT Mapping succesfully on the SPA3102 with firmware 5.1.10(GW).I have these set in the Voice/SIP tab:• Handle VIA received: yes • Handle VIA rport: yes • Insert VIA received: yes • Insert VIA rport: yes • Su...
Is there a way to over write the default AA script? I have tried through the CUE web interface and also CCA. I need to change the time that the script waits for a user to enter a character for the dial by name directory. I have used the CUE editor to...
Line1 and PSTN Line both have Subscriber Info which both happily register to SIP UAS as expected... so what are Gateway Accounts[1-4] (Line1 config) and VoIP User[1-8] used for?Gateway Accounts make some sense as part of Dialplan: Dialplan points to ...
Basic question: Can the SPA3102 be used as 2 independent UACs: one for FXS, one for FXO?I'm trying to place Asterisk in between the FXS/FXO ports for call routing which mostly works...PSTN -> Asterisk -> Line1 works a charm, including CID, only real ...
Does anyone have a comprehensive guide (or know of where I can acquire one) of the major security and feature changes for the different software packs and IOS revisions of the UC500 series phones? I can locate some of the most current releases, but ...
HiHow many contacts can the SPA525G2 store?
Hello Guys,how can i send more then one phone book to an spa phone?The interface only allowys me to read on xml directory and one ldap.I even tryed to send the second directory via provisoning to the phone but no luck.It looks like in the phone there...
Hello.Can any one advise how I can change the date format from MM/DD to DD/MM - we'd prefer the UK format.Also, does anyone have the settings for UK tones instead of US ones?Documentation on both of these features is quite lacking.
Hi, When someone calls, their number is displayed missing the leading zero. I’d like to put back the missing zero along with the 9 so users can press redial on missed calls.We’re running a UC540 with CCA 2.2(5) SIP and ISDN trunk all working well apa...
I have not been successful in finding the exact answers to my questions about the SPA5xx phones and certain features.1) Does the SPA525 support extension mobility ?2) Does the SPA504 and SPA508 support extension mobility?3) Do the answers to #1 and #...
On HTTPS requests from SPA-500 series phones I'm seeing that it takes the SPA (in this case a 504G) about six seconds to send it's ClientKeyExchange after it has received the server's ServerHelloDone. This is no problem in the case where the request ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: