Voice Systems and Accessories - Small Business

Hello,It's my first UC500, and I have some trouble.I have an issue after a failed upgrade of 7.0.3 to 8.0.4 using telnet and CCA.All terminal commands I try to run I have this error :% Invalid input detected at '^' markerIf I using CCA, and try to up...

Hi,On Februari 3rd this year, Sherman Scholten (director product management) wrote:"Dear SPA3102 (and all Linksys & Cisco ATA) Customers:We just wanted to pass along there is a mainenance release in the works for the SPA3102 which will address this a...

Does anyone know if the Quescom 300 can work with a UC500? i can find documents stating the Q200 can but cannot find anything for a Q300.Thanks

I am using a 3 tiered provision setup. On the root of my TFTP I have spa504G.cfg:<?xml version="1.0" encoding="UTF-8" standalone="yes"?><flat-profile>        <Profile_Rule ua="na">/CiscoVOIP/$PN.xml</Profile_Rule>    <Syslog_Server ua="na">192.168.21...

I have a UC500 where a workstation needs to connect to a separate network besides the UC network.  The link to the separate network is connected to fastethernet0/1/0.  The IP scheme is 10.32.4.0/24.  The gateway on that network is 10.32.4.254. I conn...

Hi,I  have my Cisco 524 phone connected to my UC500. It has two lines active  at the moment. One of the line is private and the second line is shared  with another 524 phone. I have received complaints from other colleagues and clients that my privat...

Hello!Connected Linksys spa 3102 and GSM Wavelink FCT C6 port FXO, caught in this classic problem of a busy signal.Use the PSTN Disconnect Detection-> Detect Polarity Reversal failed, as when connecting to GSM sends something that SPA immediately ter...

Hi all,I have a customer with 2 SPA942's connected to a Sipxecs IP PBX. CTI is enabled on both phones, still the configured Line Key remains Solid Amber.I was able to find a thread showing that this is an issue with that specific PBX and the SPA942. ...

  Is there anyway with the UC540 to set a custom schedule for a voicemail box?  My situation is one user has different working hours and want to have the closed greeting played later than the rest.

I have a UC540 with a One Communications SIP trunk.  When calling from the outside callers are not getting any audible rings.  My Hunt and Blast groups are doing routing, just no indication to the caller that anything is ringing.Is that a function of...

I followed the instructions in this link http://uc500.com/creating-custom-ringtones-for-cme to add the CTU ringtone for SPA504G users but when I attempt to choose the CTU option the system tells me Ring File Unavailable.  I realize that the instructi...

Hello,a quick question here - on UC 560 8.0.4 ver with full PRI lines -  can we have original callers ID  forwarded to cell phone which is on SNR.?ThanksSnezhy

Just wondering if the difference in time is normal between CME/CUE - here is a UC560 for one of my clients-UC560#sho clock09:59:27.263 PST Mon Sep 27 2010UC560-Link-murrel#serv integ 0/0 sessTrying 10.1.10.2, 2002 ... Opense-30-1-1-2# sho clock09:59:...