Has anyone experienced issues with the data ports on the SPA5x5 IP phones? We've had 8 customers open tickets that the data ports on the phones don't work when plugging a PC into the port. Thanks Terry
I have a SPA525g running the 7.4.3 firmware. I have been able to configure the Screensaver module to grab a BMP or JPG file from a webserver over http, but the "Picture Download" feature seems to be limited to only one picture. In another thread I ca...
Is there a way to provide a secure, hard wired, guest internet access without creating a 3rd VLAN ?We're using Cbeyond SIP services...We've tried a Qos switch off the IAD, in frotn of the UC and the voice did NOT like that scenario AT ALL. We'd like ...
We've set up the auto attendant to transfer calls to specific users based on a description of their role in the AA Greeting. The message played when the system performs the transfer identifies their extension, but not their name. Since the voice ma...
Hi,I recently installed the following:- SPA9000 running 6.1.5- SPA400 running 1.1.2.2- 4xSPA508G, running 7.4.3, upgraded from 7.1.3- 2xSPA500S on 2 of the above phonesThe setup is really basic, as those devices are connected to an isolated LAN, with...
Hi,I am uisng a Cisco ATA-186 version 3.02.01(050616A) box and i want to change the Domain name.Does anyone know how i can do this ?At the moment that field is empty.When i try to register the ATA box to a SIP proxy server,the SIP proxy requests auth...
So we are contemplating rolling out SPA 9000 with two SPA 400 one for VM and one for PSTN...however, I'd prefer to use SIP trunks via the ITSP. Which providers can i contact for this service on this platform? In addition, are the SPA9x series the onl...
Several of the ringtones packaged with the 8.0.0 and 8.0.1 software releases sound awful compared to the ones included in the 7.1.3 release. They pop and cutoff and have a bad echo.I don't think this is a terrible issue by any stretch of the imagina...
Hi Guys,I think I must have downloaded every available file from the Cico web site, however to no avail.Could someone please assist me with what file I requier to change the region and vmail setting language to UK - GB....I am running the UC520 8.0.0...
hi alli have a problem with the cme time.Voicemail saying incorrent timeon the phone display the right time and in the cme web interface tooHere is 09:00 and the Voicemail says 19:00in the running config i configured this:clock timezone cet 1clock su...
I have tried everything mentioned in this thread (https://www.myciscocommunity.com/thread/3591), but nothing is working. Is there a way to reset the user/apss for the web user/pass in CME and re-sync to CUE?GUI commands are correct, path is there, UC...
Can someone provide me with UC520 install/upgrade guides as well as the admin guide? I've followed the links as I normally do and am not seeing anything out there... Thanks in advance.*updated*Also, during the build out, I'm not seeing the option to ...
Just wondering if in those scenarios SPA should start disconnect tone detection and release FXO? 1. PSTN -> FXO[SPA]IP -> IP[SPA]Line1 PSTN drops the call 2. PSTN -> FXO[SPA]Line1 PSTN drops the call Thanks
Hi,I´ve setup my first SPA9000 @ a customer. I´m having some difficulties though. Some times it´s not possible to dial outbound. According to the ITSP they see that the user try to dial out, but the call is disconnect from the SPA side. Any idea wher...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: