My company is about to upgrade to an SPA9000/SPA400 system using SPA942 phones all around the manufacturing shop offices. However, I need to have the ability to make announcements throughout the shop. How would I go about doing this?
My company is about to upgrade to an SPA9000/SPA400 system using SPA942 phones all around the manufacturing shop offices. However, I need to have the ability to make announcements throughout the shop. How would I go about doing this?
I'm trying to change the DTMF relay method in a dial-peer and find that the following command is in the dial-peer, but is not recognized by CLI:voice-class sip dtmf-relay force rtp-nteCLI goes as far as voice-class sip, but there is no dtmf-relay opt...
I tried to change the language following this guide https://supportforums.cisco.com/docs/DOC-9692 but the upgrade failed about 2.5 minutes after starting during the CUE backup step with error "CUE backup - software backup for CUE module failed" follo...
How can I explain my problem? I think, the best way is a picture. Hopefully, it's clear..Case: a remote worker with X-Lite on the pc can hear the other one. But his own stream are delivered on a wrong IP (local private IP of the WAN UC500), see the p...
i have spa9000, firmware 3.3.6.i try upgrade to 6.1.5 ver, but i have problems.I tried using the wizard, the .exe loader to upload the Firmware but it just doesn't work. The wizard connects, tells me it sees the SPA9000,Firmware 3.3.6, and then tries...
Hi All,I am having a great deal of difficulty with one particular ITSP and it seems only on the UC-500, not getting the same issue with a 2800 series setup at all.The UC-500 was configured using CCA, and the other systems this SIP account has been us...
I was installed the server software on our server last night and ran into this problem. A popup window stated very clearly that the setup wizard is not supported on virtual machines. It appeared as though the software was running properly (most ser...
To whom it may concern,here is the problem: I have updated CCA to 2.0 and now I cant delete obsolete/unnecessary lines in the Voice configuration list. When trying to access the list the device is I get a prompt saying that it is "reading from the de...
Hi to all,i have used the script editor for use a custom prompt i have created(loquendo is very nice) but when the call is redirectd to the voicemail instead of earing only the beep i ear a system prompt(the extension 888 is not avaiable at the momen...
I help my customer to implement UC520 and in that process there are some problems:-UC520 is not stable, my customer make a call and the telphone goes on-hook but UC520 has held tone, the FXO led is green and not turn off. So my customer can not make ...
Hi!I've installed a UC520-16U with 10 phones at a customer. They have an ADSL connection with a Intertex IX78 modem that's sip compatible.Outgoing calls works like a charm every time, but all incomming calls fail. My SIP provider tells me that they c...
Hi to all,i want use cue script editor to add a cusomt greeting to the voicemail but when i try to use it i get a rmi error(rmi op cannot accept calls made in rmi protocol 1.1. etc.etc.) the ip address to be specified in the Tools--->options menu is ...
Hi ,i have a problems with wip310 (latest firmware) and SPA9000 (latest firmware) and 4 SPA941 (latest firmware)the wip310 are connect wi-fi via Apple Airport Extreme Base Station to SPA9000correctly registerif i call an internal SPA941 the phone rin...
I have IP Communicator running against a UC500 box in my office fine.I have a client with a similar config. They are using a Netscrren firewall with VPN.I can ping and access the GUI for the UC500. I have added the CIPC into the config so the phone...
G'day Cisco Staff,I just want to congratulate you on this latest advancement:http://blog.voipsupply.com/5-new-ip-phones-from-ciscoIt is really good to see you guys progressing into the Small Business sector, these latest phones will certainly help to...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: