Voice Systems and Accessories - Small Business

Hello Voice Experts, We have several users set up through a Cisco Unified Call Manager version 10.X All phones go to voice mail after 3 rings even if Extension Mobility is activated and user is logged. I have discovered that "No Answer Ring Duration...

I've been looking for MIBs supported by this ATA SPA112 but I have not found any specific MIB for the ATA. According to the ATA documentation: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/csbpvga/spa100-200/admin_guide_SPA100/spa100_ag.pdf SNM...

Since 3 weeks, we have a serious problem with the CUE voice mail system (UC560 version 8.1) which doen't let the possibility to let a voice message : the caller hears the extension annoucement and just after a system message "your message is too shor...

I have a client who has been using our UC 540 until their UC 320 is repaired.  My question is can I use the configuration from the UC 540 on the UC 320 and if so do I just download it to a USB Drive and drop it into the UC 320?

Hello,I have a customer who has a UC560 with 508G model phones desiring to do hookflash so that when they are on the phone, they can receive the next call from the PSTN...having the option to answer it or let it go to voice mail.  With the first call...

Hello, I would like to configure a button to support BLF, CP and SP, the user being monitored is a URI For example, a button like this: fnc=blf+cp+sd;sub=adam.crisp@$PROXY;usr=adam.crisp@$PROXY;ext=adam.crisp@$PROXY;nme=Adam BLF and CP works fine, ...

I have DMZ set to the uc540, disabled all firewalls. Outgoing calls work good but incoming will not connect to the uc540. "customer unavailable".... What can i be missing?

I have an SPA-1001 and am sick-and-tired of getting Political and Charity calls. Can SPA-1001 BLOCK more than the last call?

We are experiencing an odd issue with our UC540 with VWIC2-1MFT-T1/E1 voice interface card. The system runs fine for about 20 or 30 minutes, then staff are unable to get a line when they pick up the phone and get the engaged tone instead. CLI report...

hello, i bought this voip gateway to perform a simple task: use my pc softphone to call using my home analogic line. so far i managed to perform this, but there is an issue: everytime i send a voipcall to the adapter, the softphone shows the call as ...

Hi, I try to use a DECT phone with my SPA-2102. When a call is finished and the user of the DECT phone (Gigaset E630) forgets to end the session by pressing the red button (hook on) than the phone stays off hook for inifinite time. The base of the G...

gd mrng, i have a SPA112 and need the regional settings for germany. ALso i have the problem that when calling mobile phones i have a good connection for 2 or 3 conversations .. then when i dial i hear nothing .. but the other part is ringing and if...

Hi all, We're trying to secure Cisco SPA504G IP Phone configuration (running latest firmware), but one setting is eluding me after scouring Cisco documentation and using all my Google-fu... I've figured out how to get pretty much everything else to...

Good Day, I am trying to access a Cisco SPA 303 phone via web browser and I am being ask for a username and password, before it did not ask for it but it is asking for it now.

I have inherited a UC560.  I am not at all versed in Cisco but an learning.  We have been able to solve a lot of issues except for this one last one.  We intermittently can't make outgoing calls.  If we reboot the UC560 we can make outgoing calls for...