BLF on SPA5xx, for two differents PBX

[francoisbel]

Hi all,

Don't know if somebody tried it before.

One SPA504G, Ext1 configured for using an extension on a foreign PBX, Ext2 configured for using an extension on another foreign PBX.

All's working well, by pushing the key i can choose one or the other extension and so the PBX associated.

My incoming calls arrive well.

On Ext3 and Ext4, i would like to supervise (BLF function, Call Pickup, Speed Dial) an extension of each IPBX.

Ext3 would be for ext 102 on IPBX1

Ext4 would be for ext 103 on IPBX2

When all is configured, and when booting my SPA204G, BLF for IPBX2 stay Orange if the registration of the SPA504G happen on IPBX1 (if EXT1 is registered)

If i disable Ext1 just for having Ext2, BLF for IPBX2 become Green and Works well.

Is it possible, and if yes how to, activate 2 blf for 2 sperate PBX?

regards

[markohamal]

from manual

fnc=sd+blf+cp;sub=phone1@$PROXY;usr=101@$PROXY;nme=phone1;vid=2

vid=2 is ext2

[francoisbel]

Sorry for the delay, thx it works.

You can close the feed.

[funman1steve]

It has taken me FOREVER to find this answer!
Thank you so much!!
vid=2 is what I was missing!! Thanks a ton!!