cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3812
Views
0
Helpful
2
Replies

Buffer I/O error on device hda1, logical block 81934

Telcocapital
Level 1
Level 1

I getting the follow erro message when I session into the CUE of the UC520. All advice appreciated. I read the similar post, however  I'm not given any prompts to make a selection.

--------------------

Buffer I/O error on device hda1, logical block 81934
Processing manifests . Error processing file exceptions.IOError [Errno 5] Input/output error
. . . . . . Error processing file zlib.error Error -3 while decompressing: invalid distances set
. . . . . . . . Error processing file zlib.error Error -3 while decompressing: invalid distances set
. . complete
==> Management interface is eth0
==> Management interface is eth0

malloc: builtins/evalfile.c:138: assertion botched
free: start and end chunk sizes differ
Stopping myself.../etc/rc.d/rc.aesop: line 478:  1514 Aborted                 /bin/runrecovery.sh

Serial Number:
INIT: Entering runlevel: 2
********** rc.post_install ****************
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
STARTED: cli_server.sh
STARTED: ntp_startup.sh
STARTED: LDAP_startup.sh
STARTED: SQL_startup.sh
STARTED: dwnldr_startup.sh
STARTED: HTTP_startup.sh
STARTED: probe
STARTED: superthread_startup.sh
STARTED: ${ROOT}/usr/bin/products/herbie/herbie_startup.sh
STARTED: /usr/wfavvid/run-wfengine.sh
STARTED: /usr/bin/launch_ums.sh

Waiting 5 ...Buffer I/O error on device hda1, logical block 70429
Waiting 6 ...hda: no DRQ after issuing MULTWRITE
hda: drive not ready for command
Buffer I/O error on device hda1, logical block 2926
Buffer I/O error on device hda1, logical block 2927
Buffer I/O error on device hda1, logical block 2928
Buffer I/O error on device hda1, logical block 2929
Buffer I/O error on device hda1, logical block 2930
Buffer I/O error on device hda1, logical block 2931
Buffer I/O error on device hda1, logical block 2932
Buffer I/O error on device hda1, logical block 2933
Buffer I/O error on device hda1, logical block 2934
REISERFS: abort (device hda1): Journal write error in flush_commit_list
REISERFS: Aborting journal for filesystem on hda1
Jun 17 16:36:11 localhost kernel: REISERFS: abort (device hda1): Journal write error in flush_commit_list
Jun 17 16:36:11 localhost kernel: REISERFS: Aborting journal for filesystem on hda1
Waiting 8 ...MONITOR EXITING...
SAVE TRACE BUFFER
Jun 17 16:36:13 localhost err_handler:   CRASH appsServices startup startup.sh System has crashed. The trace buffer information is stored in the file "atrace_save.log". You can upload the file using "copy log" command
/bin/startup.sh: line 262: /usr/bin/atr_buf_save: Input/output error
Waiting 9 ...Buffer I/O error on device hda1, logical block 172794
INIT: Sending processes the TERM signal
INIT: cannot execute "/etc/rc.d/rc.reboot"
INIT: no more processes left in this runlevel

2 Replies 2

The flash card for CUE might be corrupt. Try and reinstall CUE and restore from backup to see if that fixes it. If it doesnt, try a different flash card.

Cole

I had format the router flash and updated to new version of ios. please could u tell me the flash files if required to run CUE...