CLI Config for Main number ringing Auto Attendant first

[nstcctv01]

I am trying to change a config from CLI on a UC560.  The system currently has a PRI with DIDs going direct to extensions and noans & busy going to auto attendant (4702).  The main number is currently going to extension 4710.

I am trying to have the main number 4710 ring direct to auto-attendant 1(4702) then have 4 extensions in a hunt group ring sequentially. 

How do I have the DID hit the AA first then have one of the selector code options hit a hunt group? Then how do I configure if no one answers or all are busy then direct to the general voicemail box?

[shusarka]

Hello,

Could you please share the running configuration from both UC560 and CUE module.

Command would be : show run

from the CLI of both UC560 and CUE.

Once I have them, I will let you know the details.

Sincerely,

Shubhamoy

[nstcctv01]

Attached is the fiile

[nstcctv01]

How do I access CLI of CUE?  Putty telnet will not work.