cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1394
Views
0
Helpful
1
Replies

Smart CallConnector Operator - phone disconnected

Joseph Chambers
Level 1
Level 1

Running Server 2.0.0.89b, Operator 1.6.0.16, using 525G phone.

After logging into operator, says "The phone has been disconnected. Status Code:-1.

How can I fix?

PS. I get same message when trying to use 504G phone, which I KNOW is not supported as Operator phone.

** I'm 50 minutes away from Operator tng @ customer site & now this install is doing same thing!! Different pc & 7962 phone!!

1 Accepted Solution

Accepted Solutions

Have you tried restarting the SCC server services? That can help with these situations.

If the problem persists, issue a show ephone and see if the server has an open TAPI connection to that phone you are trying to control.

View solution in original post

1 Reply 1

Have you tried restarting the SCC server services? That can help with these situations.

If the problem persists, issue a show ephone and see if the server has an open TAPI connection to that phone you are trying to control.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: