Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1269
Views
0
Helpful
2
Replies

UC560 phones freezing

ipgatewaypl
Level 1
Level 1

‎12-13-2011 01:44 AM - edited ‎03-21-2019 05:03 AM

Hi,

I have a UC560 and it has 41 IP Phones connected. There is a mix of SPA502G, SPA525G2, 7921 and 7975.

There  is an issue that IP Phones are randomly freezing up and disconnecting  etc. and the only way to fix it is to reboot the IP Phone, which isn't a  long term solution. It can happen randomly and anytime.

Some IP  Phones are PoE on a Cisco Catalyst 2960S and some are using AC adapters  connected to other switches. All phones are setup with static IP  addresses and are on the main data VLAN (we cannot run separate VLANs  unfortunately).

Can anyone help shed some light on what could be causing this and or how to fix it?

Thanks

Mark

Labels:
0 Helpful
2 Replies 2

Tommer Catlin
VIP Alumni
VIP Alumni

‎12-13-2011 08:55 AM

Can you check to see which Firmware is running on the phones and also what firmware/IOS is on the UC560?   Its probably not the switches, but some sort of SCCP communication between the 560 and phones.  Do you notice any issues on the UC560 such as high memory or CPU usage?

0 Helpful

ipgatewaypl
Level 1
Level 1
In response to Tommer Catlin

‎12-20-2011 12:55 AM

The UC560 is running the latest firmware and the SPA phones are running the latest loads from that firmware.

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents