VPN

Hi peopleI have configured Anyconnect access with split tunneling and I can connect with the username and password but the problem is: I can't connect to the two hosts I have given in my split tunneling. When I connect to anyconnect I get the IP addr...

Hello We are testing the AnyConnect VPN Client to replace legacy IPSec VPN Client 5.0.x.We could setup the connections with SSL and IPSec (IKE v2).Now we have to decide which ist the better method.What is your experience or suggestion ?Thanks for any...

The ISAKMP SA lifetime for one of our DMVPNs is set to ~ 24 hours in the following ISAKMP policy:crypto isakmp policy 3 encr 3des group 2 lifetime 86399Despite this, the Crytpo tunnels go down every 2 hours. They come back up after about 4 seconds.We...

First, I have attached a diagram to hopefully provide a little clarity to my problem.  I have a location, which I will call my main location for the purpose of this issue that has multiple VPN solutions running on it:A DMVPN for connectivity to the W...

I have Samsung Note 800 10.1 tablet running Icecream Sandwich Andriod SW.I am a cisco employee, trying to connect to Cisco VPN using “Samsung Anyconnect” fromMy Tablet Sam. I entered VPN server  : Bangalore-vpn-cluster.cisco.comWhile connecting  it s...

Dear all,I had a view minutes today playing with IKEv2 on a Cisco Router running 15.2.2T . Since I’m running on IPSEC + HSRP + SSO in our live environment I tried to recreate the setup wit ikev2 but failed in every aspect. So my question does  a HA s...

Hello all,I'm in the process of setting up a working VPN/Firewall setup on an 881W ISR.  I have the firewall, NAT, and VPN working, and I'm able to connect remotely to my router.  The problem I am having is that I none of my VPN cllients can connect ...

Afternoon Ladies/Gents,I have a cisco 1900 (running ios v 15) at my head office and asa 5505 (asa 825) at branch office, connected by a site to site VPN tunnel.Now, at the head office I've forwarded ports 25, 1723 and such for the server which sits a...

Hello,we are planning to connect a 2921 ISR G2 on a branch site using 3 ADSL lines of different ISPs.The goal is to load balance the lines in order to gain more bandwith and have some redundancyif one of the links fails. So far, so good.The branch si...

Hi all,I ve setup Anyconnect on ASA 5510 and it seems to be working fine but cant get Jabber to work on smart phones. When using the packet tracer i see my packets dropped on WEBVPN-SVC. I am not using NAT anywhere and i can normally ping the CUCM fr...

Hello,I have a strange issue when enabling SSL vpn on a second interface on ASA 5510.The ASA gots a /30 connected on outside interface to the Internet but i can't use that ip on port 443 because another service is connected to it.We got another subne...

Hello,Currently I want to add a second lan (vlan) in a customers network. The new network will be for a wireless infrastructure.There is also VPN Configured on the ASA - One with L2TP for Windows Clients and an IPsec for Cisco Clients.Former we only ...

Hi, you make a good point about VPN ... I never thought of that. Now -- If any of you are struggling with vpn problem, then I recommend you check out VPN Trade. There is a thorough review on ithere http://www.vpntrade.com. I hope that helps some of y...