VPN

Hello Everyone, Here I have a specific requremtent from a customer. To make things clear.     Customer = My Client     Client = My Client's Client 1) Customer's Remote working employees will be connecting to enterprise network using Anyconnect VPN.2)...

I have a couple of Windows clients that don't seem to forget previous VPN ip addresses when they connect again.  I have seen 6-8 IPs on the Anyconnect adapter on one of these machines.  I have been searching around but thus far have not found anyone ...

Hello,I am getting Certificate Validation Failure on Cisco Anyconnect Client on one of the devices. "It may be necessary to connect via proxy which is not supported with Always on." I have copied working profile folder from other devices but that did...

Hello, when building IPSEC VPN across CSR1000 on Azure to SonicWALL firewall, with IKEV2, getting below error, from previous blogs and support manuals, I have verified that both side IPSEC proposals are correct + ACLs on both sides allows the traffic...

Hello all, We have a Firepower firewall with FMC and a Syslog server.We use some IPSec VPNs poitn to point  and we want to enable syslog logs for troubleshooting.I have added in device, Platform Settings, Syslog Settings some Syslog IDs like 713050 o...

We have a big project involving the deployment of hundred of firewall in different locations: HQ and shops. Each shop was connected to the regional HQ via VPN, either EasyVPN or static L2L (the latter case, when the shop has two Internet lines). Curr...

I just checked FMC 6.4 guide and I do not see anything reference to VTI OR Route-based VPN. So does anyone know if the feature is adding to the FMC/FTD soon?

i have FMC and ftd .I  had some experience with setting up ikev1 site to site vpn as i provide the other side with these phase1 and phase 2 info as following:phase1:encryption, hash , DH group , lifetime , authen methodphase 2esp encryption , esp has...

DACLs oh how I love them.We have lots of users requiring specific routes for their projects, and we have set up DACLs based upon the connection profile. It works well, works across multiple VPN endpoints and can be comprehended by my little brain.Wit...

Moving from an RSA based certificate which is expiring to an EC based cert on ASA 9.13. Is there a minimum AnyConnect 4.x version required to support this? Also will there be an impact on site to site IPSec vpns?

I'm looking to get some information regarding this error. I'm a tech at my organization's service desk who runs into this error far to often, and have to run down a whole slew of possible causes because of the vagueness of this error. I believe the v...

Hi, in the past I configured manually ipsec dial-in for remote workers using for Mac user Cisco IPSec client with Pre-Shared key. Additionally some L2L IPSec tunnel (ikev1 plus preshared keys).Now some Win10 user should also dial-in and because of wi...