Restric an anyconnect user to a single Public IP

[Victor Eduardo Cossio Quispe]

Hello.

I am not sure if this is supported. As titled: Is it posible for ASA 8.6 to restric an particular user to connect from anyconnect client from just one particular public IP?. this is: user1 can connect to ASA via anyconnect from only 190.200.101.43 and not from other IP address.

Greettings.

[Jeet Kumar]

Hi Victor,

This is practically not possible.

There is no configuration which will allow a user to connect from one particular IP address.

Thanks

Jeet Kumar