cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1155
Views
0
Helpful
3
Replies

Wsa config sync

Sindibade 78
Level 1
Level 1

hello, i looking for confirmation is the async os will provide a config sync in the next release when deploying two appliances in HA with explicit mode.

thanks

3 Replies 3

Handy Putra
Cisco Employee
Cisco Employee

The functionality still not in the roadmap yet.

You can do that if you have SMA (Security Management Appliance) since that appliance is intended to do centralise management and also reporting for multiple WSAs. Therefore if you make a change in SMA for WSA appliance, you can push out to all WSA appliances therefore all WSA has identical configuration.

This possibility is valid when we use two WSA connected in HA via VRRP actif/standby deployement?

Thanks.

Yes.

If I remember correctly, the SMA will manage the policy configuration, but not the network or security config.  You set up the System Admin, Network sections as normal for each box.  Make the Security Services section match for the boxes, the SMA will tell you what doesn't match, but won't fix it for you (ENHANCEMENT REQUEST!!!!!), and then you can build the policies on the SMA and push them to the WSAs.

Ken