Can the Cisco Aironet Autonomous access point be converted to Lightweight Access Point Protocol (LWAPP) using the CLI?
The access points (APs) cannot be converted from autonomous mode to LWAPP mode via the CLI. The Upgrade Tool is the only method you can use. A newer version of the Upgrade Tool (version 1.7) will be available soon and is able to convert more than one AP at a time. In order to download any images, firmware versions, tools, and so forth, refer to the Wireless Download page.
Obtaining the Upgrade Tool and Upgrade Image
The autonomous mode to lightweight mode access point upgrade process is only supported for access point running Cisco IOS Releases 12.3(7)JA and later. The access points must be upgraded to this version or a later version before they can be converted to lightweight mode. Consult the Cisco Aironet documentation on upgrade procedures for autonomous access points.
You can find the upgrade tool and the upgrade image at the Download Software page on Cisco.com.
You must register or be a registered user of Cisco.com to download software. To find the tool and the software image, follow these steps:
Buena tarde a todos espero me puedan apoyar, tengo una duda al configurar un ssid en la WLC 8510 en el ancho de banda del Qos me marca que el rango limite es invalido si lo configuro con mas de 500 MB , me gustaria saber si es es posible configurar ...
Hi, I have little to no experience with cisco EWC.I want to create a 2 separate SSIDs which are Internal and Guest.I think in EWC, Guest settings is included. I want to use the same LAN subnet for both SSIDs. And I don't want the Guest Wifi...
Hello,My EA2700 router just functions just perfectly. The Guest Acces also, although very rarely used.Until today, when it appeared that the guest access dosn't function anymore.When starating to browse, the browser tells the user to register (with paswor...
We have been using this WAP since 2017. Today I reset it back to its default settings. The problem is that now I can't access it to configure its settings. I don't see it on our home office network and don't know its IP address. It...