download TFTPd32 from Google and install it on ur PC.. point the image that you have downloaded in the TFTP server..
connect a Ethernet cable between ur laptop and AP.. both should be in the same subnet.. and connect a console cable and get the hyperterminal console access and issue the command.. make sure you are able to ping the PC and the AP and vice versa!!
AP#debug lwapp console cli or debug capwap console cli
AP(confg)int fa 0
AP(confg-if)ip addr <addr> <mask> (same subnet as that of the laptop)
AP#archive download-sw /force-reload /overwrite tftp://<tftp ip address>/<image name.tar>
Hi,Might not be the optimal place to ask about a Microsoft-issue, but we have many enterprise laptops running the latest windows 10 with intel wifi-cards that support 802.11r. The SSID is running FT adaptive, and iOS-devices are successfully connected and...
Trying to convert 1572E from lightweight to autonomous but not working. Configured and IP in ethernet port and bvi interface. APac3a.6744.a720#ping 10.1.1.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 se...
Greetings, The 9120 AP needs to have the CA certificate as trusted certificate so that it can connect to the RADIUS server and authenticate as Dot1x supplicant. Could you advise how to upload the CA certificate to the AP ?. The WLC is a 98...
Hi Please see the below diagram with central dhcp server. Not sure how to define the "central". When we create dynamic interface at wlc, we need to enter dhcp server ip address. Can we say this dhcp server is central dhcp server? otherwise is local dhcp s...