cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
19409
Views
5
Helpful
0
Comments
TCC_2
Advocate
Advocate

Resolution

To enable all ports, enter these commands in configuration mode:

  • Configuration mode
  • port adminmode all enable
  • network webmode enable
  • network secureweb enable

The port adminmode command enables Web Graphical User Interface (GUI) access on all of the ports on the controller. The network mode enable command also allows HTTP access (in addition to  HTTPS, if configured).

To enable secure web mode (HTTP), issue the network  secureweb enable command. After every command is issued, reboot the  controller for the changes to take effect.

Problem Type

Cannot console or telnet or GUI into a device

Products

WLAN adapters (wireless card) / ACU (Aironet Client Utility)

Device Access Method

GUI Interface

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links