05-08-2012 12:24 AM
Hello,
I have problems with a newly installed AP541N wireless network, seems that I'm not the only one, but the threads I have been looking at doesn't seem to have exctly the same problem
Clients:
Wireless setup
Three SSID:s
The network is very simple with a firewall providing two VLAN:s, the internal network and the guest network. Cisco Switches are used. The access points are connected to a 2960 PoE switch. The Acess points have the most recent software released in April.
The environment is a one-floor office with a U-shaped central corridor. Some open spaces with lot of workers exist. The placement of the access points has been done with effort to minimize cells; they are placed inside rooms rather than in the corridor to minimize interference. There are other networks around (The office is a part of a large complex) There are about 50 clients.
Problems
Apple users seem to have less problems, but I have seen the loss-of-traffic on my iphone.
What we have tested
Somehow I get the feeling that we have bought equipment that doesn’t stand up to our needs, but I hope I am wrong and can get some help to get this working.
Thank you,
Fredrik
06-05-2012 01:11 AM
We have disconnected/shut down some of the AP:s wich made things a bit better, but not good. I have also checked if the access points change frequency, but they had been using the same frequency for 23 days.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide