Hello community, I need use cases where a Cisco access point supported more than 200 simultaneous users. Has anyone seen this? I saw it once at Rock In Rio (with another vendor), but I don't remember the details. Has anyone worked at an event with a ...
¡Bienvenido a la Comunidad!
La comunidad es un punto de encuentro para conectar con sus pares y expertos de Cisco, pedir ayuda, compartir su experiencia, construir su red y crecer profesionalmente.
¿Nuevo aquí? Haz clic aquí para saber más e iniciar.
¿Nuevo aquí? Haz clic aquí para saber más e iniciar.
Publicaciones del foro
I have a WLC model 9800 and I need to create an ACL in which an FQDN is declared because the portal to be accessed does not have a fixed IP. Is there any way to do this?
Foro Ask Me Anything (del 20 al 28 de marzo de 2025) Este foro está dedicado a las preguntas relacionadas con el webinar "Dominando la Configuración y Gestión de redes Wireless con Catalyst Center", del pasado jueves 20 de marzo de 2025. Revisen la ...
Resuelto! C9130AXI-A EWC
When I change the EWC the AP Send this message: Checking ...OKChecking image size...OKChecking image family...Image family not supported with C9800-APCleanup eWLC files ...Image download completed. I've been trying to update and it still doesn't work...
I have a WLC 9800-L-F, version 17.12.04. My WLC has several access point models, one of them is the CW9163E-ROW model, my country code is MX (Mexico) configured in the AP Join. I just saw on the main screen that the 6 GHz band is down. I see that ...
Comunidad, es posible utilizar las listas de control de acceso (ACL) para clasificar el tráfico y aplicar restricciones de ancho de banda, destino y vincular a QoS en el WLC 5520? En el WLC 9800 si es posible, adjunto ejemplos: Favor sus comentario...
Foro Ask Me Anything (del 20 al 28 de febrero de 2025) Este foro está dedicado a las preguntas relacionadas con el webinar "Lecciones Aprendidas en Implementaciones Inalámbricas - Alta Densidad", del pasado jueves 20 de febrero de 2025. Revisen la g...
Hello: We have a Cisco ME-based deployment with several 1542i APs that are almost physically inaccessible. We have purchased several 9124AXi to expand this deployment and have connected them to a 9800-CL virtual controller. Now we want to move the ol...
Hello, we have an AP model CBW 150AX.We are testing the device on 2 different networks, in one it works correctly but in the other we cannot reach the console. We believe that the company that provides and manages the internet is filtering the traffi...
Hola a todos tengo un ap2802e-a-k9 con una imagen Mobility Express y no tendo un Wireles Control y necesito configurar todo por linea de comandos alguien tendra o sabra como configurar el ap por lineas de comandos necesito crear dos ssid, colocarle c...
Resuelto! AIR AP 3802E-A-K9
Necesito de su apoyo para conseguir el IOS autónomo para utilizar este modelo de ap podrian ayudarme
i! Does any one face this kind of logs before? I'm deploying some new devices IE-5000-12S12P-10G in stack IOS Version 15.2(8)E5, but I getting some logs like this:volt_ptc_heater_status(): PSOC5 SYSTEM_STATUS_0 register (0x51) read failed (HOSTNAME)...
Good afternoon or evening everyone, I have a problem to integrate a cisco 9800 wlc with LDAP.In the cisco WLC I have configured the LDAP profile and it has been associated with an SSID.During the authentication tests with a user it was detected that ...
Good dayPlease help, I have a 1852I ap that does not start the operating system and stays at:U-Boot 2012.07 (btldr release 31) (Nov 15 2017 - 16:34:04)This product contains some software licensed under the"GNU General Public License, version 2" provi...
