Wireless

Hi allI have an issue where when some users are roaming from 1 side of the building to the next they drop off the network and have to forget and reauthenticate. I didn't set this controller up but I can see Fast transition is adaptive enabled. So I s...

I am deploying the Cisco 9136 AP for 6E in our new office building at high density. What has been the recommended power on this AP in office settings? I typically deploy from 8dBm to 14dBm but curious what others have done with this new AP over 6Ghz

Due to the license issue in the c9800-cl model, the number of joined apps was limited, so we created a rum file with air gap and imported the ACK.rum file by referring to the link below. https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-98...

Hi We are going to purchase Access points C9115AXI-I and C9115AXI-EWC-I . Both are same prices But C9115AXI-EWC-I is announced by Cisco to be end of sale end of this month. So we can purchase only C9115AXI-I with the DNA essential license I need to c...

If connectivity between WLC and AP goes down for sometime, will clients connected to AP's face network disruption? or there is any grace period that client's rest of use(browsing, access) will work. 

I have to deploy APs to branches using flexconnect. Do i need to preconfigure the APs on my local controller then ship them out or can i just load in the MAC along with the tags i want on the AP ship it out and then itll grab everything it needs? eve...

Hello,   We have a problem with a C9800 Wireless Controller (version 17.9.4a) and Cisco C9120 Access Points. Some clients are roaming from one AP to another, while there're not moving from their desk. For exemple, as shown in the exemple, a client in...

Hi. We have 3 new 2802I that we can't get to work. We're using a 3750 switch to power the other 2702 which works fine with our 2500series controller (version 8.3.112.0). Since the 3750 can't provide enough power for the 2802 we bought a couple of D-...

Hello Team, I have an issue with BYOD authentication as user is able to connect with SSID and receive IP address but webpage redirection is not happening and Logs shows L3 authentication failure. WLC: C9800 Authentication server: Clearpass. Attaching...

When I import the signed certificate to c9800 controller I get the message "% Failed to parse or verify imported certificate". Seekng assistance on how to resolve this problem, thanks.

Hi Guys, i have some reports from clients that they occasionally loose connectivity during authentication to EAP-TLS enabled SSID (that is using AAA override to steer them into correct vlan / flexconnect setup) I've tried to check the live logs on th...

Hello, So, I was migrating very old wireless network devices (WLC 5508 and Ap 3602I) at a customer site. Customer purchased WLC 9800-L-F and C9136I-ROW AP. We decided to use 17.12.3 as the WLC software. The software being marked as Cisco suggested re...

Hello, We have a handful of WLC 5520 units in our lab being prepared for deployment.  We are just working on getting AireOS updated from 8.10.132.0 to 8.10.196.0 via the SP GUI, and getting this error:  We noticed the same issue in this bug report: h...