Wireless

Hello,I try to setup a 1141 aironet AP to authenticate my user through our Ms Radius Server ( Win 2008 R2).Everything is fine with small Bussiness AP WAP4410N with the following configuration:But I can't setup successfully the aironet 1141 with the s...

Recently installed a 1262N AP in autonomous mode. Have both 2.4 and 5Ghz radios running- Both on separate SSID and VLAN.  I think I have 5Ghz channels using 40Mhz bands (bonded) but when I do iperf throughput test I only get about 25Mb throughput. I ...

Hi,we have WLC 4400, we have 40 APs with model no. AIR-LAP1131AG-N-K9 but we recenlty got an AP with model no. AIR-LAP1131AG-E-K9 which is unable to join WLC. I search net for the same I come to know there is some issue with regularity domain, any id...

Hello!I would like to retrive some specific reports from the NCS regarding load threshold violation on some specific 1142N accesspoints. Using the alarm browser don´t help me that much because you cant see the history of how many alarms each AP has g...

WLC Mode: AIR-WLC2125-K9 Version: 7.0.116.0Here is the scenario, we have two WLC, one is located at SG and the other is located at MY (In test stage). Both WLC has configured with three Country Codes CN,MY and SG , as well as the Regulatory Domain 80...

Long story short.  I am installing a Cisco 1142 AP in an environment that already has numerous other AP's.  The existing AP's are all ceiling mounted.  The question is can we mount our AP by simply setting it on top of a cabinet hence it will be upsi...

Long story short.  I am installing a Cisco 1142 AP in an environment that already has numerous other AP's.  The existing AP's are all ceiling mounted.  The question is can we mount our AP by simply setting it on top of a cabinet hence it will be upsi...

Hi, I have an AP 1141N-A-K9, from autonomous system, with this IOS ( c1140-k9w7-mx.124-21a.JA1), and a WLC 5508 with Version 7.XI want to convert this AP to ligthway to use with this controller.I download de Version of IOS (c1140-rcvk9w8-tar.124-21a....

I am a new administrator to this company and the previous admin didn't document user level_15 access. I can log into the AP's with level_1 access. Everything is working fine at the moment, we just don't have controll over them. Does anyone know if we...

Dear All,I have cisco wap 200 access point.it is configured with security WEP.is there any option so i can block a cell phone user to block to use WI-FI ?they have company laptop aslo. so i have to give WEP key to him.is there any function that detec...

Should I trunk the port to the AP or notI have a WLC 5508 in the head office and have AP's in the remote office. I do not want traffic in the remote office to traverse the wan back to the WLC. I want the users at the remote office to use the local su...

Hii have two WLCs AIR-CT5508-K9, monitored by WCS (in retiring stage) and NCS. All APs are grouped in HREAP groups based on their locations. The wireless users are getting ip from a dhcp pool running on routers located at each site. All dhcp commands...

Hello,I have three 5508 WLCs, running code 7.0.98.0 supporting 100+ LWAPs in H-REAP mode. The LWAPs are servicing 2-3 WLANs each. Some are using central authentication and local switching, some are configured for central authentication and central sw...

I just recieved new 7921 phones. I cannot get them to pick up a dhcp addressI keep getting DHCP "Timeout's"  and " Configuring IP" .The ould 7921's and the new 7925's work just fine. I have tried removing andreconfiguring the WLAN and Interface on th...